Notes

1. All Linksys routers support SPI firewall.
2. Which among the four operation mode of a WAP300N, can add Wi-Fi connectivity to any Ethernet-ready device like a game console? Wireless Media Connector
3. In Windows 8, the wireless icon with an asterisk or star symbol means? There are available wireless networks and it is ready to connect.
4. How many port triggering entries can you set on the EA3500? 10
5. How do you connect to an access point that is not broadcasting the SSID? Create a Profile that matches with the SSID and Wireless Security of your router
6. The RE2000 has a Wireless Client Table where you can view the devices connected.
7. _____ is a WAN Connection Type that uses Fixed IP Address, Subnet Mask, Default Gateway and DNS from the ISP? Static IP
8. What are the possible Internet Connection types if Cable ISP? Static IP and DHCP
9. The customer is trying to connect his WRT610N to Verizon DSL and he is getting an error message
10. How many wireless clients can be added in the MAC Address Filter List? 32
11. What is the setting that you need to configure on a Linksys router if you want to access its Setup page from a different location? Remote Management
12. When configuring a router's Internet connection for cable ISP, you should? Clone the MAC address of
13. MIMO is the use of multiple antennas at both the transmitter and receiver to improve communication performance. TRUE
14. How will the RE2000 affect the transmit rate of wireless clients that are using it to connect to the router? The range expander will reduce the transmit rate to approximately 1/2 of the original data transmission rate
15. How many Guest networks can I set on the Linksys WRT1900AC? 2
16. What is the type of Cable used to connect a computer to port 1 of an SE2500 switch? Straight-Through or Crossover
17. What is the best thing to do to avoid intermittent connection issues using a Linksys Range Extender? Make sure the Range Extender is getting at least 50% of router's wireless signal.
18. The WAP300N can work as a firewall? FALSE
19. What is the recommended antenna position for single-story environments using a Linksys WRT1900AC? All external antennas are in upward position
20. Port triggering is used for special applications that can request a port to be opened on demand. True
21. The computer can ping the IP Address of a website but not the actual URL using a Linksys EA6500 router. What could be the problem? DNS resolution
22. How many ways can you set up an RE2000? 4
23. What is the OS requirement when setting up a WES610N V2? No Operating System specification is required, since there is no setup software
24. E1200 E1500 and E1550 routers have Guest Access and Parental Control feature on its web-based setup page.
25. How do you install an AE3000 to a Windows 7 computer. Insert and run the CD and connect the adapter following the on-screen instruction
26. Where can we turn off the Ethernet port light, on the RE2000 user interface? Status> Ethernet Statistics>selecting radion buton Off under Ethernet Port LED
27. Which wireless connection standards are supported by the AE6000? All of the choices
28. What is the default IP of a WGA600N? 192.168.1.250
29. How many internal antennas does the Media Connector Bridge have? 3
30. How many Ethernet ports does a Linksys X2000 have? 3
31. When you encounter interference using a Linksys Smart WiFi router, what will be the first step you need to do to resolve the issue? Change channel
32. The E900 router will lose its current settings after firmware upgrade. TRUE
33. To fully employ WPA, you should have: An OS that supports WPA, Config utility that supports WPA, and Access Point that supports WPA
34. What is the default IP Address of a Linksys router? 192.168.1.1
35. What is the Auto option under SSID Broadcast of the RE6500? It will allow the RE6500 to follow the access point or wireless router's SSID broadcast setting.
36. The customer connected his computer to port 4 of the EA6500 router and found out that the LINK light is not lit. What will be the first step in troubleshooting the problem? Check if the cable is properly connected from the computer to the switch port of the router
37. FALSE. When you try to access the UI of an E-series router right after reset, it will immediately ask for a username and password.
38. If you have an AE1000 to be connected to an EA6500, what is the radio band that you need to select to get the best performance for video streaming and gaming? Wide-40 MHz
39. In setting-up WPA-PSK on an Windows 7 computer with a AE6000 installed, we must key-in how many characters on the Network key field? 8-63
40. It's a feature of the Linksys WRT1900AC that allows customers to manage and monitor devices' connected to their network. Network Map
41. What is the default Operation Mode of a WAP300N? Access Point
42. E2000 E3000 E1000 wireless router supports AP isolation
43. TRUE The WRT1900AC can be configure as a Wireless Bridge or Repeater?
44. You cannot disable the SSID broadcast of the EA6400 EA6200 EA6300 routers
45. TRUE The range extender, RE6500, has a wireless music playback feature.
46. What are the power specifications of the WUMC710? 12 Volts (V) and 1.5 Amperes (A)
47. What does it mean when the online LED of a cable modem is blinking? signal from the cable company may be too weak
48. Which Mac OS version is not supported by Linksys Connect software version 1.4? Mac OS x Mavericks
49. What is the Guest ip range of an E-series router? 192.168.33.1
50. Converts Ethernet-equipped devices to wireless network connectivity, Dual-Band, Wireless N speed are features of the WES610N
51. What will occur when Wireless MAC Filtering is enabled on the router? When you connect to your SSID, it doesn't try to acquire a network address and it says 'disconnected'.
52. TRUE When the router is set up for a PPPoE connection, PPPoE dialers that have been configured on your computers must be disabled.
53. What is the Guest ip range of a Linksys Smart Wi-Fi router? 192.168.3.1
54. What are the different ways to upgrade the firmware of a Linksys router? Web UI and TFTP utility
55. What does it mean when the LED of an AE6000 is blinking or flashing? blinking or flashing LED indicates that there is wireless network activity
56. What is the default number of DHCP clients on a Linksys router. 50
57. Where can you find the QoS option on the E4200v1 UI? Under the Applications and Gaming tab
58. TRUE. The RE4000W supports Qos
59. TRUE. You can use a Wireless-N adapter with a Wireless-G router.
60. E800 and E900 routers does not support Parental Control and Guest Access features
61. TRUE. We can change the IP address of the EA6350 wireless router to 192.168.3.1, same IP scheme used by the Guest network.
62. TRUE. The drivers of the AE6000 must be installed first before using the WPS button.
63. MAC Address Cloning is the process of copying the MAC Address of a NIC to the Linksys router for Cable ISP authentication.
64. What is the default IP address of RE2000? 192.168.1.1
65. Linksys wireless bridges (e.g. WUMC710 and WES610N) require software drivers to be installed on a computer. FALSE
66. TRUE. The E900 router will lose its current settings after firmware upgrade.
67. Port triggering is used for special applications that can request a port to be opened on demand. TRUE
68. Linksys Connect software can be used in setting up a Linksys E2500 v3 router on a Win8 computer. TRUE
69. What is the recommended antenna position for multi-story environments using a Linksys WRT1900AC? Front antennas are in upward position while rear antennas are angled outwards
70. Reasons why the router's setup page is inaccessible? There is no network connection with the router, The router's firmware needs to be upgraded, The computer's firewall may be blocking the connection
71. What is the best thing to do when the modem and the router operates as DHCP servers under the same network? Change the IP address range of the router to avoid conflict
72. What is the proper way to reset the Linksys E-series and the Linksys Smart Wifi routers? Press and hold the reset button; wait for the power light to start blinking before releasing the button
73. What is the OS requirement of a Linksys Smart Wifi router? OS X Leopard (10.5.8) and later versions and Win XP SP3 and later versions
74. The RE2000 has a Wireless Client Table where you can view the devices connected. True
75. These are features of an E1000 router? Accessible via web, MAC Filtering, NAT Firewall
76. When you access the ui of an E-series router, you will see a warning page, that states the following,
It could also prevent you from using Cisco Connect, Cisco Connect is a desktop application to help you with the most common tasks such as guest access, parental controls, and adding new devices to your network, Using this advanced utility to change your router settings could disable your network
77. These are the differences between E4200 v1 and v2:
a. The web-based setup page of E4200 v1 can be accessed using its default IP address 192.168.1.1 while the E4200 v2 web-based setup page can be accessed using 192.168.1.1 or entering "myrouter.local" on the address bar of the web browser.
b. The maximum wireless speed of E4200 v1 is 300 + 450 Mbps (2.4 GHz and 5 GHz) speed while the E4200 v2 is 450 + 450 Mbps (2.4 GHz and 5 GHz) speed.
c. The E4200 v1 allows a maximum of 10 wireless devices to connect to its guest network while the E4200 v2 can accommodate 50 as long as it is configured through its web-based setup page.
78. TRUE. UPnP should be disabled if you have devices connected to the network that needs port forwarding or triggering.
79. What does it mean when the Internet light at the back of the EA6100 router is solid? Physical link is up on Internet port but there is no data activity.
80. The following are supported media playe Where can you find the QoS option on the E4200v1 UI? rs of RE6500: Windows Media Player 12, Sofa Play, MediaHouse
81. A customer calls in about the installation of an AE1000 wireless USB adapter on a Windows 7 PC . He explains that he gets a message "Device is not properly installed" What would be the proper procedure? Go to the device manager, spot for the device with a yellow exclamation point and update it with the correct drivers
82. What is the default IP of a WAP300N 10.100.1.1
83. The customer has 3 computers wired to the Linksys router. One of them is not connecting to the Internet. How will you address the problem? Check the IP address of the non-working computer
84. Where can you find the reset button of an E1200 wireless router? at the bottom of the router
85. What does it mean when the LED at the front panel of the RE2000 flashes quickly, every second, for 2 minutes? If there is an error
86. On which tab of the E-series router GUI will you find the Internet IP address of the router? Status
87. When the Westel Wirespeed modem is being used in router mode, how will you configure the Linksys router to get online? change router IP Address
88. What would you do if the customer is prompted to use a dial-up connection every time he opens Internet Explorer. Go to tools, internet options, and connections then set to "never dial a connection"