Notes

The Top Reasons Why People Succeed In The Repairs To Upvc Windows Industry
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation you'll need source some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action when you discover that your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you cannot reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. double glazing Burnham is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need close your window and do an experiment fit. The corners of the sash must be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.


If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal than the frame. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue could be caused by opening the window improperly or a faulty installation at the factory. This can often be resolved by sending us a picture through our website and we will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also decreases the chance of windows getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. If they are beyond repair, it may be required to realign them. The interlock, which is on the hinge side of the window, may also become misaligned, again it is possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them instead of fixing them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.

Here's my website: https://www.repairmywindowsanddoors.co.uk/burnham-windowrepair/