Notes

10 Easy Ways To Figure Out Your Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation you'll need to find some plastic spacers that will aid the new pane in being able to fit correctly into the window frame.

If you plan to try to remove the window panes by yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.


Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. talks about it 'll first need to close the window and then perform an initial fitting. The corner joints of the sash must align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the issue is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens with the breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is essentially a very simple process, but it's easier with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The issue could be caused either by opening the window improperly or a faulty installation in the factory. Sending us a photo through our website can often resolve the problem. We are always happy to offer suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges can also become disaligned as a result of wear, creating gaps where the sash meets frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. Second, the interlock can also become misaligned. This happens on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace these.

The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as possible.

Here's my website: https://www.repairmywindowsanddoors.co.uk/window-repairs/