Notes

Are You Responsible For The Double Glazing Lock Repairs Budget? 10 Terrible Ways To Spend Your Money
Double Glazing Lock Repairs

The best locks for your doors and windows will stop burglars from gaining entry into your home. They don't usually like breaking glass or trying to get through windows that are open.

Some double glazing owners, however, have experienced problems with their door or window lock following the installation. These issues can usually be fixed without the need for new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window lock or door lock if it is damaged or is not working properly. They can fix hinges, striker plates, and locks for your double-glazing. They can also move the cylinder in order to fix any misalignment which could be causing your handle not to operate correctly.

If the key fits inside the lock but it won't turn or is difficult to insert the mechanism might be stuck. The dirt or grease could get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should work through the mechanism and the lock should be able turn with ease.

A damaged lock can be caused by loose screws inside the mechanism of the lock. They may loosen and break off or fall out completely and stop the lock from working correctly. The screws can be tightened by using a screwdriver, but be careful not to overtighten them. This could damage the internal components.

A damaged lock can be dangerous for your family and you. This is particularly the case if you have children. They can easily unlock the door without your knowledge, giving them access to your house. If you're worried that this might occur, a professional locksmith can help re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing, who can repair any type of defective and broken mechanisms handles, handles, cylinders, and lock systems on uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are damaged or are damaged

As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is an excellent option for those concerned with criminals who are looking to gain entry to your home. Ask your installer about antilift blocks. They can be put in as an addition to the existing locks and aid in keeping your windows closed.

Handle locks are usually damaged or fail. They are the first part that criminals will utilize to force open your window. Fortunately, the good news is that this is among the most straightforward parts to repair.

Modern uPVC and aluminium handles have a multi-point locking mechanism called Espagnolette that is designed to withstand forced entry. This security upgrade is often available as an extra on new uPVC window installations. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.

It is important to repair the handle as soon as possible after it has been damaged. The damaged handles could stop the window from closing properly and allow drafts to enter. It could also be a weakness that burglars who are opportunistic could exploit, therefore putting your belongings and family at risk of being taken.

The process of repairing the malfunctioning mechanism begins by opening the window frame and then removing the damaged handle. The gearbox is then accessed to identify the type of gearbox that is used to open the handle. This allows a replacement that matches the profile and internal window frame mechanisms.

After the mechanism has been replaced the handle can be fixed using the original screws - however, we generally recommend replacing them with longer ones as this will give a more secure fit. The final stage is to apply a layer of clear sealant in order to protect the handle from further rust. After that the window will be operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or damaged

If your windows aren't shut correctly, draughts may get in, your home's security measures will be compromised and you run an increased risk of damp or water damage. Windows hinges that break or fail are a common issue and can be fixed easily.

If your uPVC windows don't close or open and close, it's likely hinges need to be repaired or replaced. Most window companies will require you to purchase an entirely new window unit in order to fix this simple problem, but we can replace the hinges in order to save you money.

Window hinges are often damaged through repeated use, or weakening over time due to corrosion. If you find a broken hinge, it is important to take precautions to avoid further damage by being careful not to force the window to close or open.

You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to consult an expert in this regard so that you don't make the mistake of purchasing parts that aren't compatible with your existing hardware and cause further damage.


The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be a significant source of noise and also allow for water infiltration that can cause damage to your windows.

To fix this issue, first check that the pin barrel on both sides of the hinge is aligned. If double glazing repairs Grays isn't, tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will help to keep the pin in the right position. Have a person hold the doors while you take out hinge screws and hinges. Replace the hinges and then install screws using glue. When the glue is drying, fix the hinges by using weights or clamps.

Once the hinges have been fixed, you should be able to re-install the door and attach the handle. Replace the screws with wood dowels of the same size as the original screw to ensure they are in line.

Glass that is damaged or Faulty

While uPVC windows do an excellent job of keeping cold out and warm in, they can become damaged over time. This can be the case with broken or damaged glass and faulty locks. This issue can be very expensive if neglected. This can also detract from the aesthetics of your home and cause a loss of insulation. It is essential to repair any damage promptly.

You can repair the crack in your glass by yourself if your have the proper tools and techniques. Be sure that the area surrounding the broken glass is free of debris, so that shards do not cause injury or cause a trip hazard. Then, remove the broken glass pieces and dispose of them in a appropriate way. Apply masking tape to the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass it's best to prepare the glass before gluing it back into place so that you know you'll have enough room to complete the task.

Use a clean, dry cloth to clean the surface of the broken glass and the frame before applying the glue. Follow the application and curing instructions, which may vary from product to product. Based on the degree of the crack you may want to secure the glass to hold it in place while it is curing. You can do this using lightweight clamps designed to hold fragile materials.

Once the adhesive is fully cure, carefully install the glass into the window frame, ensuring it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid flexing the glass as you reinstall it because this could weaken the seal. This can lead to condensation or water infiltration.

If you have a glass window that is completely shattered or has larger cracks, call an experienced professional glazier such as O'Brien(r) to arrange a replacement. Unattended handling of broken glass can pose a safety risk for children and pets, so it's essential to act swiftly.

My Website: https://www.repairmywindowsanddoors.co.uk/grays-windowrepair/