Notes

5 Conspiracy Theories About Repairs To Upvc Windows You Should Avoid
Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of problems including sliding. A sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen. The majority of the time this is due to screws that have come loose over time. However, upvc window repair can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The corner joints of the sash need to align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.


Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it blows open with an ease. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, creating an opening where the sash and frame meet. These can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to have them aligned or replaced. The interlock may be disaligned. This is located on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace them.

The next common reason for draughts are the window seals. They can become worn down or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. It is crucial to realize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you are having issues with your upvc windows, it's best to seek professional assistance as soon as possible.

My Website: https://posteezy.com/20-resources-make-you-more-successful-repair-upvc-window