Notes

10 Things We Hate About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve energy efficiency.

1. Broken Glass


The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For redirected here , it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could develop a number of problems that include sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows to reach the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you can't reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism getting worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hinder your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease It could be the hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is easier if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also be unbalanced due to wear, which can cause gaps where the sash meets frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is on the hinge side of the window, can also become misaligned, again it may be possible to give them a clean but in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.

Read More: https://notes.io/wyK47