Notes

13 Things About Double Glazing Lock Repairs You May Not Have Considered
Double Glazing Lock Repairs

Quality locks on your windows and doors will help prevent burglars from gaining entry into your home. They usually don't want to break glass or try to get through windows that are open.

However, some double glazing owners have had issues with their door lock or window lock after it was installed. These issues can usually be resolved without the need for a new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window lock or door lock if it's damaged or broken. They can repair hinges, striker plates, and locks for double glazing. They will also be able to reposition the cylinder to fix any misalignment problems that may be causing the handle to not function correctly.

The mechanism could be seized if the key fits in the lock, but it does not turn or be difficult to insert. Grease or dirt can get stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the mechanism's inside. After lubricating the lock, you should insert the key and then try to turn it. The lubricant should work its way into the mechanism, and the lock should spin smoothly.

A malfunctioning lock could be caused by loose screws in the lock mechanism. They can become loose, fall out, or even break completely preventing the lock to function properly. These screws can be tightened with a screwdriver, but be careful not to over tighten them. This can damage the internal components.

A damaged lock could be dangerous for both you and your family, especially if you have young children. It's possible for them to unlock the door without knowing and thus give them access to your home. If you're concerned that this could occur, a licensed professional locksmith can assist you to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair any type of defective and broken mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, which means that in most cases, replacement doors and windows are not required.

Handles that are damaged or broken

As part of their overall security package, many double-glazed windows come with a multipoint lock. This is a great choice for those worried about potential thieves who may try to gain access to your home. Ask your locksmith about antilift blocks. They can be installed alongside your existing locks and can ensure that your windows are securely closed.

It's not uncommon for handle locks to become damaged or fail - they are the first part of your window that could be pushed open by a criminal intent on breaking in. Fortunately, the good news is that this is one of the easiest parts to fix.

Modern handles made of aluminium and uPVC feature a multi-point locking system known as Espagnolette that is designed to withstand forced entry. This security upgrade is available as an option for new uPVC windows. Older style uPVC and aluminum handles can be upgraded to shoot bolt locking systems also as an optional extra on new double glazed window installations.

When a handle is faulty it's important to get this repaired as quickly as you can. A damaged handle can stop the window from closing correctly and letting in a draft. It may be a weakness that opportunistic burglars might exploit, placing your home and belongings at risk of theft.

The process of repairing the damaged mechanism begins with opening the frame of the window and removing the broken handle. The gearbox is then accessed to identify the type of gearbox that is used to open the handle. This will permit an alternative that is compatible with the profile and the internal window frame mechanisms.

After the mechanism has been replaced, the handle can be fixed using the original screws - however, we usually recommend replacing them with more long screws as this will give a more secure fit. The final step is to apply a coat of clear sealant in order to protect the handle from further corrosion. Once you've completed this step your window will be functioning again at a fraction of the cost of replacing it.

Hinges that are broken or faulty

If your windows do not close properly, you may suffer from draughts or an affliction of your home's security, and an increased risk of damp or water damage. Windows hinges that break or fail to function properly are a common issue and can be easily repaired.

If you have a uPVC windows that won't open or close, it's likely your hinges are damaged or broken and need to be replaced. While many window companies require that you purchase a new window unit in order to solve this issue We can replace the damaged hinges and save you money.

Window hinges may break from repeated use or they could be weakened through rust over time. If you have a broken window hinge, it is essential to take steps to avoid further damage. This includes not forcing the window to close or open.

You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to speak with an expert in this regard to ensure that you don't make the mistake of buying parts that are not compatible with your existing hardware and cause further damage.

A faulty hinge is a major problem for uPVC doors and windows. They can be a major source of noise, and can also permit water to infiltrate your windows.

To fix this issue, first check that the pin barrel on both hinge halves is aligned. If it's not, tap the head pin using a hammer to make an arc in the barrel of the hinge. This will keep the pin in place. Ask a friend to hold the doors while you take out hinge screws and hinges. Replace the hinges with ones of a matching size and attach the screws using glue. When the glue is drying, fix the hinges with weights or clamps.


Once the hinges have been fixed and repaired, you should be able to re-install the door and then reattach the handle. Replace the screws with wood dowels of the same size as the screw that was used to ensure they are in line.

Broken or damaged glass

While uPVC windows do a great job of keeping cold out and heat in, they can become damaged over time. This can be the case with damaged or broken glass and damaged locks. If not taken care of, it can become a very costly issue. It can also affect the appearance of your home and can lead to loss of insulation, which is why it's crucial to repair any damage as quickly as you can.

You can fix your cracked glass by yourself if you have the proper tools and techniques. Be sure that the area surrounding the broken glass is clear of debris so that any shards do not cause injury or cause a trip hazard. Then, remove the broken glass pieces and dispose of them in a appropriate manner. Then, apply masking tape to the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane glass it's a good idea fit the glass pane before gluing it back in place so that you are sure you'll have enough room to complete the task.

Use a dry, clean cloth to wipe clean the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application and curing time, which can vary from product to. Depending on the direction of the crack, you may want to hold the glass in place during curing. This can be done using lightweight clamps that are designed to hold fragile materials.

Once the adhesive has fully cure, carefully insert the glass in the window frame. Make sure it's in line with the frame edge and that there aren't gaps between the glass sash and frame. Avoid bending double glazing repair Cambridge as you put it back in place, as this could weaken the seal. This can lead to water infiltration or condensation.

If you have a glass window that's completely broken or has larger cracks, consult an experienced professional glazier such as O'Brien(r) to arrange the replacement. It's essential to act swiftly if you have broken glass.

Website: https://www.repairmywindowsanddoors.co.uk/cambridge-windowrepair/