Notes

5 Laws That Can Help The Double Glazing Lock Repairs Industry
Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows helps to prevent burglars from accessing your home. They generally don't like breaking glass or squeezing through windows that are open.

Some owners of double glazing, however, have encountered issues with their door or window lock following the installation. Fortunately, these issues are usually fixable and don't require to buy new double glazing.

Broken or Faulty Locks

A locksmith can fix your uPVC window or door lock if broken or faulty. They can fix the striker plates, hinges, and locks on your double glazing. They can also reposition the cylinder in order to fix any misalignment that could be causing your handle not to operate correctly.

If the key fits into the lock but it won't turn or is difficult to insert then the mechanism may be seized up. This can be due to grime or dirt getting stuck inside the mechanism. If this is the case, it might be possible to clean the lock and then lubricate. It is essential to apply a dry lubricant like graphite or teflon instead of oil, which attracts dirt and stick to the inside of the mechanism. After lubricating the lock you need to insert the key and try to turn it. The lubricant must be absorbed into the mechanism and the lock should be able to turn easily.

Screws that are loose within the lock mechanism are another reason for a malfunctioning lock. They can loosen and break off or fall out completely and stop the lock from working properly. A screwdriver can be used to tighten these screws however, it is important not to tighten them too much, as this can cause damage to the internal components.

A damaged lock can be dangerous for your family and you. This is especially relevant if you have young children. They can easily unlock the door without knowing which gives them access to your house. If you're concerned about this happening, then a vetted locksmith can provide rapid and effective service to re-secure your double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and damaged mechanisms on uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your specific needs, which means that in most cases, replacement windows and doors are not necessary.

Handles that are broken or damaged


Many double-glazed windows have the multi-point lock as part of the overall security package. This is an excellent option for those worried about potential thieves who may try for ways to gain access to your home. It is also a good idea to ask your locksmith about anti-lift blocks which can be put in with the existing locks and help keep your window firmly locked in a closed position.

Handle locks can be damaged or fail. They are the first thing criminals will use to force open your window. The good news is that this is one of easiest parts to fix.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is often offered as an optional extra on new uPVC window installation. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot and again as an additional extra on new double glazed windows.

If a handle is defective, it's crucial to get it repaired as quickly as you can. The damaged handles could stop the window from closing properly and permit a draft to enter. It may be a weakness that burglars who are opportunistic might exploit, placing your home and belongings at risk of theft.

To fix the malfunctioning mechanism, you first need to gain access to the window frame and then remove the broken handle. The gearbox can then be accessed to determine the type of gearbox that is used to open the handle. This will permit to replace the handle that matches the profile and internal window frame mechanisms.

After the mechanism has been replaced, the handle may be reattached using the original screws. However, we suggest replacing them with longer screws since they provide an even more secure fit. The final stage is to apply a coat of clear sealant in order to protect the handle from further rust. After you've completed this step the window should be functional again, and at a fraction the cost of replacing it.

Broken or Faulty Hinges

If your windows don't close properly, you could be experiencing draughts, a weakening of your home's security barrier and a higher risk of damp or water damage. Broken or faulty window hinges are a frequent issue that can be fixed easily.

If your uPVC windows don't close or open it's likely that hinges need to be replaced or repaired. A lot of window manufacturers will require you to buy an entirely new window unit to fix this simple problem, but we can replace the hinges to save you money.

Window hinges may break from repeated use or they might be damaged by corrosion over time. In the event of a broken hinge, it's important to take steps to prevent further damage by taking care not to make the window swing open or closed.

The type of hinge you are looking for will help you identify the correct parts to fix it. Maco, Mila and Roto are all window hinges. It is recommended to speak with an expert in this situation to avoid the mistake of buying parts that are not compatible with your existing hardware and could cause further damage.

A damaged hinge can be a big issue for your uPVC window and doors. They can be a major source of noise, and they can also allow water infiltration which can damage your windows.

To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If not then tap the headpin using the hammer to create a slight bend in the hinge barrel. This will hold the pin in its place. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges with those of a matching size and then attach the screws using glue. Finally, while the glue is drying, put a secure hold on the hinges by using clamps or weights.

After your hinges have been repaired after which you will be able to install the door and then reattach the handle. window repairs Hayes is a good idea to replace the screws using the same length of wood dowels as the original screw, so that they match up with each other.

Glass that is damaged or Faulty

While uPVC windows do a great job of keeping the cold out and heat in, they are susceptible to becoming damaged over time. This can be the case with broken or damaged glass, as well as faulty locks. This is an issue that can be costly should it be neglected. It can also affect the aesthetics of your house and can lead to loss of insulation, which is why it's important to repair any damage as soon as you can.

You can repair your cracked glass yourself if you have the appropriate tools and techniques. Make sure that the area surrounding the broken glass is free of debris to ensure that shards do not cause injury or cause a trip hazard. After that, take away the broken glass pieces and dispose of them in a proper way. Apply masking tape across the entire area. This will stop shards of glass from sticking to your skin and splintering when you move them. Pre-fitting the glass pane before gluing it in place is a good idea if you are dealing with windows with two panes. This will ensure that you have enough space to complete your project.

Use a dry, clean cloth to wipe clean the glass's surface and the frame prior to applying the glue. Follow the application and curing instructions that differ from product-to-product. Depending on the direction of the crack, you may need to clamp the glass during curing. This can be done using lightweight clamps that are designed to hold delicate materials.

After the adhesive has fully cure, carefully install the glass in the window frame, making sure it's flush with the edge of the frame and there are no gaps between the glass and the window sash. Avoid bending the glass as you reinstall it, as this could weaken the seal. This can lead to condensation or water infiltration.

If you have a glass door that's completely shattered or has larger cracks, call a professional glazier such as O'Brien(r) to organise an exchange. Leaving broken glass unattended can pose a safety risk for pet and children and is why it's important to act swiftly.

Here's my website: https://www.repairmywindowsanddoors.co.uk/hayes-windowrepair/