Notes

Problem Trouble And Solutions Of Floating Fish Feed Equipment
Problem Issue As Well As Solutions Of Floating Fish Feed Maker

Trouble Issue Of Fish Feed Machine

Your floating fish feed maker will certainly appear several problems after it functioned a long period of time, or due to your wrong procedure, your fish feed equipment has happened troubles or otherwise working well also quit working.

Typical problems are reduced production outcome, too expensive puffing or otherwise sufficient puffing, and also poor pellet developing, versus these problem problems, specifically on inadequate pellet forming trouble, a few of our clients met this type of problem, some because of raw materials formula, some because of wrong operation, as well as in here we will certainly give some troubleshooting and services for you.

Repairing Of Fish Feed Machine

Solutions Of Reduced Production Output

1. small wood pellet mill for sale is put on greatly, please alter the screw head or the entire screw

2. The bushing of the extrusion chamber is put on considerably, please change the bushing in the extrusion chamber

3. If you transformed the formuation or otherwise? for sinking fish food pellet maker : starch web content percent: ≥ 20%, for floating kind pellets: starch content portion: ≥ 10%. On top of that: Especially for floating products, the web content of pet healthy protein must not be too expensive.

The role of starch:

1). Starch has strong water absorption;

2). The gelatinized starch can improve the viscosity of the material

3). Dual feature of puffing and also binding in the final pellets

The role of healthy protein:

1). Healthy protein has water absorption, elasticity as well as coagulation

2). Protein is split right into: veggie healthy protein and also pet healthy protein, Solutions including vegetable healthy protein are generally easier to refine than those containing animal protein. Since animal healthy protein is not as very easy to integrate with various other ingredients or mass as veggie healthy protein or starch


4. Is the aperture area of the die is suitable or otherwise?

A= 1aperture area area= πr2, 10holes-8mm die 8mm diameter= 4mm redius.

area= πr2, 3.14 × 16= 50.24 mm2.

10 holes × 50.24= 502.4 mm2.

Solutions Of Too High Puffing Or Not Sufficient Puffing.

1. the raw materials are blown a lot also highly.

1) the conditioner temperature is expensive( for wet type maker).

2) the rotation speed of the host machine is expensive.

3) way too much or too much less water included the raw materials or in the conditioner.

4) the holes of the die mould is blocked.

2. The puffing level of the material is not enough.

1) the extruder manufacturing ourput is reduced.

2) the conditioner temperature level is not enough high.

3) the turning speed of the host machine is also low.


4) the home heating plate temperature in the extrusion chamber is as well reduced.

5) water material is too reduced in the conditioner or in the raw material.

6) have you ever before transformed the formulation.

3. Poor pellet forming.

1) the raw products formula is not so good.

2) the working temperature level is too expensive or also reduced.

3) feeding raw materials is not balanced.

4) the reducing rate is not appropriate, too high or too reduced.

5) the cutting blades are worn.

6) the size of powder basic materials is also huge, you can examine right here the raw materials dimension requirement.

die pellet pro pellet maker φ (mm) grinding fineness required.
1.095% reach to 90-100 mesh.
1.595% reach to 80 mesh.
2.095% reach to 80 mesh.
3.095% reach to 60 mesh.
4.095% reach to 60 mesh.
5.095% reach to 60 mesh.

4. The final pellets are harsh surface as well as various lengths.

1) some partial holes of the die mould are blocked.

2) the finness of the raw products is not enough.

3) the raw materials conditioning is bad.

4) the high quality of the die mould holes is poor.

5) the cutting blades are used.

6) the water portion in the raw materials is not remedy.

5. The extrusion temperature level is as well low.

1) the steam conditioning temperature level is as well reduced (for damp kind maker).

2) The vapor inlet pipeline of the puffing chamber is blocked or the temperature of the electrical heating gadget is inadequate( for damp kind equipment).

3) Jacketed steam line (catch) plugged( for damp kind machine).

4) The temperature of the electrical home heating plate is as well reduced or the electrical heating button is not turned on.

5) Resources dampness is too high.

6. Bits are blocked prior to leaving the die hole.

1) The bit size of the raw product is as well huge relative to the size of the die hole.

2) The quantity of water is inadequate to make the product circulation.

3) the screw rod is worn greatly.

4) The feeding inlet is obstructed.


My Website: https://magnificentmilelightsfestival.com/exactly-how-to-pick-the-right-type-of-biomass-fuel/