Notes

7 Useful Tips For Making The The Most Of Your Replacing Upvc Window Handles
Replacing uPVC Window Handles

The replacement of window handles made of upvc is a fairly straightforward task. It is crucial to ensure that the replacement handle fits inside the spindle cutouts in the window mechanism.

If the steps below are followed correctly, any cockspur handle should be able to fit into most windows. The height of the step of the handle is key.

What to Look For

Many of the windows in the UK are fitted with uPVC handles, and over time they will begin to show signs of wear and wear and tear. The handle on the window can become loose or difficult-to-operate when this occurs. Anyone who is familiar working with basic hand tools can accomplish this fairly simple job.

The first step is to ensure that the handle is securely attached to the frame of the window in its open position. The next step is to find the screws or pins that secure the handle. They are usually on the inside of the handle. They can be removed using an screwdriver or pliers.

Once the handle has become loose, gently pull it away from its hinges. Then, you will need to locate a replacement handle in the same style and size. This can be done at an online store or in a DIY store. The procedure should take just five minutes and a screwdriver.

One crucial aspect to take into consideration when replacing a uPVC window handle is its step height. This is the distance between the handle's base and the place it sits within the frame of the window. This is a standard measurement and you should check the height of the step before purchasing the replacement handle.

There are a variety of sizes based on the type of handle. Inline handles for uPVC windows typically have 31mm lug centres, and there are also cockspur handle types with 43mm centres. Tilt and turn handles are often found on windows made of uPVC and they have a special design that allows windows to be slid up for ventilation and turned to open the window fully.

The most common uPVC handle breakage is internal cracking rather than a breakage from the base. This makes it difficult to open. It is crucial to ensure that any replacement handle has the same spindle that was used in your original one.

Take off the handle from the old one.

Incorrectly installed or damaged window handles can cause your double-glazed windows to close or open improperly and could even cause them to become stuck. This could be due to various factors, including general wear and tear on the handle or corrosion. In these situations it is crucial to locate replacement upvc window handles immediately to avoid further damage and loss of functionality.

When replacing the handles of windows made of upvc, you should remove the old handles from the window. Begin by removing the screw covered when the handle in closed position. This should reveal another screw that once removed, you can begin to remove the handle. It is recommended to use an electric screwdriver for this as it will make the task much easier and quicker.


You should also be aware that screws could be hidden beneath caps made of plastic. It is best to remove the covers with the help of a Stanley knife. After removing the handle, you will have to examine the square cutout on the base to ensure that the new handle for the window lock is compatible. This is crucial as you will need to measure the length of the spindle on the previous handle to ensure it is the same size as the window mechanism and handle spindle that has been cut out.

The different kinds of window handles made from upvc include: Espag handles, which feature a central screw that can turn left or right; Cranked handles, with two screws, and are used on tilt and turn windows made of upvc; and Spade handles, which have a flat arm and can be placed on either side of the window. It is simple to replace the handle once you have identified one that is suitable. Just screw it into the frame, and ensure that the spindle is correctly inserted into the lock mechanism. After you have done this then tighten the handle to the window frame. The replacement upvc handle will now be secure.

Take a measurement of the Spindle

If you're replacing a Upvc window handle that has slipped off, it is likely because the spindle holding it in place is loose or damaged. In some instances, this could be fixed by using pins or screws to secure it. In other cases it will require replacement completely. There are many different kinds of upvc handles. There are three types of handles: inline espagnolette tilt-and-turn, and cockspur. Each type of handle is mounted and replaced in a different fashion.

Before purchasing a replacement handle it is essential to know the dimensions of the one you have. This will ensure that the handle will fit the window correctly and will be the right size. Fortunately, all handles adhere to industry standard sizing so it's relatively easy to identify the correct size.

To measure the handle's size you must turn the window to the open position. Then, you should be able to determine the size of the screw or pin that holds it. Use a ruler or tape measure to determine how long the spindle is. Once you know the length of your spindle, it is possible to purchase a replacement of exactly the same length.

The step height of a window handle is also important to take into consideration when you are buying a replacement. The step height is the distance from the base of the handle to where it sits on the frame. This usually is approximately 21mm or 9mm in aluminum and uPVC. To be sure that the new handle is suitable the gap, drop something into the space to see the distance it will go before meeting an obstruction.

Cockspur handles typically have different backset heights depending on the style of window they are installed in. Inline espag handles have an average height of 43mm centre to centre (2 fixing points). Cockspur handles however have different backset heights depending on the shape of the window they are in. This is due to the fact that they have a spur that extends from their handle and locks onto a cockspur wedge striking plate.

Fit the New Handle

Once you've selected the new handle, align it carefully with the holes for screws on the door. Then, secure it with the screws supplied. Install door handles Repair My Windows And Doors to the handle on the main handle when you're replacing the door handle. Then, attach the door trim to hide the screws for mounting.

Tips: To remove a metal head from a wooden wedge, place the handle on the floor so that its wide end is on the floor. Then, use an hammer and tap the narrow end. Be careful not to scratch the handle or spindle.

Website: https://www.repairmywindowsanddoors.co.uk/hounslow-windowrepair/