Notes

Why Replacing Upvc Window Handles Is The Best Choice For You?
Replacing uPVC Window Handles

It is simple to change the handles on windows made of Upvc. It is crucial to make sure that the new handle fits inside the spindle cutouts in the window mechanism.

If you follow the steps below any cockspur handle can fit in most windows. The key is the step height of the handle.

What to Find

A large portion of windows in the UK come with uPVC handles and, over time, they will begin to show signs of wear and tear. When this occurs, the handle could become shaky or difficult to operate, which makes it necessary to replace it. Anyone who is comfortable using a basic hand tool can accomplish this fairly simple job.

The first step is to make sure the handle is securely attached to the window frame and in the open position. The next step is to locate the fixing pins or screws that keep the handle in position. They are usually located on the inside face of the handle and are removed with a screwdriver or pliers.

Once the handle has become loose, it can be removed from its hinges by gently pulling it off. It is then time to locate a replacement handle of the same style and size. This can be done in the DIY store or on the internet. The procedure should take just five minutes, and you will need a screwdriver.

When replacing the handle of a uPVC handle it is essential to consider the step height. This is the distance between the handle's base and the place it is placed in the frame of the window. It is generally a standard measurement, and it is crucial to determine the step height of your existing handle before ordering the new one.

Depending on the kind of handle you choose There are various sizes to choose from. Inline handles are offered for uPVC windows that have centers of 31mm for lugs, while cockspur handles come with lug centres of 43mm. Tilt and turn handles are often used on windows made of uPVC, and they come with a unique design that allows the window to be tilted in for ventilation and turned to open the window completely.

The most frequent uPVC handle breakage is internal cracking instead of a break at the base. This makes it difficult to open. It is important to ensure that any replacement handle is fitted with the same spindle as the original one.

Remove the old handle

If your window handles are damaged or improperly installed, they could cause double-glazed windows to open and close incorrectly. They may even become stuck. This could be due to many reasons, including general wear and tear on the metal handle or corrosion. In these situations it is crucial to replace the upvc window handle as soon as you can to avoid further damage or loss of function.

One of the first things to do when replacing the handles on your windows made of upvc is to remove the old handle from the window. Start by removing the screw by the handle while it is in the closed position. This should reveal another screw, and once it is removed, you can begin to remove the handle itself. It is a good idea to employ an electric screwdriver to accomplish this since it will make the task much easier and quicker.

It is also worth noting that the screws on the handle may be hidden behind plastic caps, so it is recommended to take a Stanley knife to the screw caps and then remove them. After you have removed the old handle, you will have to examine the square cutout on the base to make sure that the new handle for the window lock is compatible. It is essential to measure the length of the spindle on the handle that was used and then compare it with the size of the window mechanism spindle cutout.

There are upvc door handles Repair My Windows And Doors of upvc handles: Espag handles with a central screw that can be turned right or left and Cranked handles that have two screws, and Spade handles which are made of flat arms and can be used on either side of the windows made of upvc. Once you have found a suitable replacement, it is just a matter of screwing the handle in place and ensuring that the spindle is correctly inserted into the lock mechanism. Once this is done then it is time to secure it to the window frame and the replacement window handles made of upvc should be secure.

Measure the Spindle

If you have to replace a handle made of upvc that has collapsed, it's likely the spindle holding it in place is damaged or loose. In some cases you can tighten the spindle with pin or screw. In certain situations it is necessary to replace the handle. There are a few different kinds of window handles made from upvc. These include inline espagnolette handles, cockspur handles, and tilt and turn handles. Each handle type is installed and replaced in a different way.

It is crucial to measure the current handle before purchasing the replacement. This will ensure that the new handle is the right size and will fit correctly within the window. All handles are calibrated according to industry standards, making it easy to find the correct size.

To measure the handle's size you must turn the window to the open position. You should be able to determine the dimensions of the screw or pin that holds the handle. Use a ruler or tape measure to determine the length the spindle is. Once you know the length of the spindle you can purchase a replacement one with the same length.

When buying a replacement you should be aware of the step height of an window handle made of upvc. The step height is measured from the base to the point where the handle sits on the frame. This is usually around 21mm or 9mm in aluminum and uPVC. Dropping objects into the space will allow you to observe how far the handle extends before it comes into contact with an obstruction.

Cockspur handles can have different backsets based on the kind of window you want to install them in. Inline espag handle heights are 43mm from centre to centre (two fixing points). Cockspur handles however have different backset heights dependent on the shape of the window they are in. This is because they feature an extension spur that extends from the handle and is secured over a cockspur wedge striker plate.

Fit the New Handle


When you've picked a new handle, make sure you align it to the screw holes in the door and secure it using the screws supplied. If you're replacing the latch lever it can be put in similarly to the door handle. Then, you can reattach the door trim to hide the mounting screws and close off your project.

Tips: To remove the metal head from a wooden wedge, place the handle on the floor, so that its wide end is on the floor. Then, you can use an hammer and tap the thin end. Be careful not damage the handle or the spindle.

Homepage: https://www.repairmywindowsanddoors.co.uk/hounslow-windowrepair/