Notes

What Is Replacement Handles For Windows And How To Use It?
Replacement Handles For Windows

Window handles are among the most used parts of your double glazed windows. Over time, they may be worn out or rusty.

You'll need to know your current handle's spindle length and its fixings before you replace it. The best way to do this is to examine the base of your previous handle.

Handle

Over time, uPVC window handles and locks can become damaged due to wear and tear, accidental or deliberate damage. This could mean that the handle or lock becomes difficult to open or close, or it's not locked at all. If this happens, it could be tempting to replace the whole window unit, but it's not always necessary. It's usually the case that a replacement handle or lock is sufficient.

The most commonly used kind of uPVC window handle is the espagnolette style. The handle is equipped with a spindle that protrudes out of the handle. It slots into a gearbox that operates the multipoint locking mechanism inside the window. upvc door handles stock a variety of replacement handles and locks for all types uPVC window to ensure that they function properly.

It's a good idea to replace a uPVC handle using screw covers to shield the screws from corrosion and to keep them secure. It is also possible to use a washer or spacer to allow for a tighter seal. A screw cap can stop debris and water from entering the handle, which can cause damage.

After taking the handle out of the window, it's an ideal idea to clean both the spindle as well as the threaded part of the bolt. This will ensure that the new handle is able to fit and function well, and it will also stop dirt from entering the multipoint lock.

The next step is to put in the uPVC handle. Be sure to read the instructions that come with your new handle and take a look at the handle you had previously to get a better idea of how it's done. The process is usually simple. If you have any issues not addressed in this guide, we suggest contact our team for more information.

It's also worth noting that if you're replacing the uPVC handle cockspur (also known as an Espag handle) you'll need to examine the step height of the window to determine the proper size of handle. The step height is the distance from the frame or base of the window up to where the cockspur's nose handle is located when it is installed.

Hinges

If your windows are starting to close and open with a visible gap this could be due to the hinges not being in line with the frame. This is usually an easy fix that can be solved with a new set of replacement hinges for windows. We can offer a variety of options and customise the size of the hinges to suit your requirements.

Whether you have a standard wooden or upvc window, we can supply a wide range of different kinds of hinges for your windows. They are available in a variety of colors to fit with the existing frames. They are also supplied with all the fixings you need to install them. If you have a double glazed window that has an older type of hinge, we can also offer a selection of repair screw kits which allow you to re-cut the thread from the previous form back into the frame.

We have a variety of different hinge types including traditional casement window hinges that can be used with a standard or tilt and turn handle, up to fire escape egress hinges for use on larger sized side hung windows. These hinges are designed to open fully in an urgent situation and have an easy-cleaning position. We also stock hinges that are restricted in egress and are designed to restrict the opening angle of the window to a maximum of 100mm which is ideal for homes with children.

The sound of a hinge squeaking could indicate that the hinges require to be replaced. It's typically due to metal hitting metal. If the noise persists then a small amount of lubricant may aid.

This is because plumb windows are in a position to avoid binding. The operating sash is aligned with the frame so that the window will be able to open and close properly. If a window is not plumb can start to close and open with difficulty or be distorted over time, which can affect the seal and appearance of the window.


You can buy replacement hinges for windows made of upvc in imperial or metric measurements. In general, the metric sizes are a little more precise, but it isn't evident once they are installed. The first corner fixing holes on the track and arm are standard size, but the rest could differ in length based on the original hardware. We advise that you measure the spacing of holes on your existing frame prior to purchasing any hinges made of upvc in order to ensure that they are of the correct size.

Crank

Normal wear and tear over time can result in damage to the window handle, lock or crank mechanism. This could make it difficult to open and close your windows. It could also affect their security. If your window is difficult to open or close or you hear a clicking sound when turning the handle it could indicate you need to replace the mechanism. If you are unable to lock your window or the multipoint lock is broken it might be worth considering replacing this piece of hardware as well.

A new window crank is able to be replaced with little effort, but it's crucial to ensure that you purchase the right size replacement. You can determine whether the new one has the exact same step height as the old one by measuring the distance from the guide for the crank arm bushing to the notch on the track at the bottom of the frame. Alternately, you can determine the length of the spindle on your current handle to determine the size you will need for a replacement.

The type of window handle you have will determine what kind of crank mechanism is needed for your casement or awning windows. Espag handles are equipped with a mental spindle on their back, which is connected to the window frame and is the motor for the window mechanism while cockspur handles have pegs which are fixed to the frame by three or four screws which are fixed to the sash and frame.

Once you've identified the right replacement, it's easy to install. Remove any screws for mounting trims from the casement cover, and carefully lift the cover off to reveal the innards of the window operator (Photo 1). Remove any trim screws that are rusted and then compare the new operating lever to the old to ensure they match. Then, screw the new lever to the window frame, and replace any screws that were rusted or bent, and then place the casement cover on top of the mechanism.

Read More: https://www.repairmywindowsanddoors.co.uk/crawley-windowrepair/