Notes

15 Reasons To Not Ignore Timber Sash Windows Cambridge
Door Hinge Repair Cambridge

The hinges on your doors are a tiny but important detail that can make a significant difference in the look and performance of your doors. Replacing your noisy hinges is an easy, low-cost upgrade to enhance the appearance of your house.

Petroleum jelly or bar soap is a common way to fix squeaky hinges. Rub the item onto the hinges to cover it.

Replacement Hinges

Hinges are a small component that can cause a substantial amount of damage if they break or wear out. The good news is that hinges can be repaired without the use of any special tools. It is essential to select the correct hinge for your home. This will ensure that your door closes and opens smoothly. If your door hinges are not functioning properly, consult an expert to fix them as soon as is possible.

A defective hinge can cause the door to swell or pull away from the frame. This is typically caused by improper use or weight too much. To stop this from happening, it is important to lubricate your hinges. This will stop the hinge from becoming damaged or rusty, and will extend the life of your door.

There are many different kinds of hinges. Each type has its particular advantages and disadvantages. The butt joint is the simplest hinge. It connects the door to each side with a pin. This hinge is perfect for doors with light weights since it doesn't require much strength to open or close. However, the butt joint is more susceptible to being damaged than other hinges.

For heavier doors, it's best to choose a continuous piano hinge. This type of door hinge is able to span the entire length of the door. It allows the door to be shut and opened easily. This style has the advantage of not requiring the use of a center support and is more sturdy.

Another hinge type that is commonly used is the storefront pivot hinge, which enables doors to pivot from one place at the top and bottom of the door. These hinges are often found in commercial buildings and are difficult to repair if damaged. A professional can help you with this issue by mounting an entirely new pivot hinge or changing the hinge that was previously in use. Based on the type of hinge you choose, the price will differ.

Loose Hinges

If hinges aren't in good condition, they will cause the door to hang in a crooked manner and may even start to scrape against the floor, which is frustrating at best. Loose hinges are a common problem that can be fixed by anyone with just a few basic tools. Most of the time, simply tightening hinge screws can fix the issue however in some instances the screws may be worn out and won't remain tight. If the holes in the screws are stripped, you will have to drill them out and then plug them in with wooden dowels or glue-coated wooden matches.

To prevent your door hinges from getting loose, it is important to ensure that they are lubricated and tightened regularly. Look for signs of damage to the hinges. If you spot cracks or chips in the material, this could be a sign that it's time to replace the hinge. It's also a good idea to replace the hinges if you find that they're beginning to bind or stick when you close and open the door.

The most common reason that hinges for doors loosen is due to wear and tear resulting from continuous use without proper tightening and lubrication. This is especially relevant for doors that are frequented by children, as they might hang from the door handles or even hang the door on hinges. This puts a lot of unnecessary strain on the hinges. This can cause them to become loose and then falling out completely.

If the hinges were loose for a short period of time, you may just tighten them using an screwdriver. However, when they're loose for a longer period of time, the constant movement of the hinge plate and the screws will begin to enlarge the holes the screws are inserted into. This can make it impossible for the screws to stay in place and they will eventually be stripped, rendering them ineffective. To fix this, put the bare end of a match made of wood into regular carpenter's adhesive and then tap it with a hammer, working the glue into the hole as deep as possible. You will probably require a few matches that are coated with glue to fill the hole.

Rusty Hinges

Rust is a concern when it comes to hinges on doors. This is particularly true for older doors. It can make them appear awful, but more important, it can cause the hinge to fail and break and pose a risk to those who use the door. It is possible to save a damaged hinge by doing a little work. The first step is to take the hinges from the door, and then clean them to rid them of any gunk. Once the hinges have been cleaned, they can be oiled to use them again.

Modern doors are made from metal alloys or brass which are resistant to rust. Some people choose to use hinges from the past due to their beauty and long-lasting. However, they are more likely than modern ones to get rusty. The best method to prevent this is to prevent the hinge from getting rusty.


It is the easiest way to clean your hinges frequently using steel wool and water, especially when they are damp. If you do this often, rust won't be a problem with your hinges for doors.

If you're looking to take things a step further, you can use stainless steel for your hinges. Like iron, stainless steal isn't rusty. It also gives your home a modern look. If you're not able to change the hinges on your existing door but you want to the best method to prevent rust is to keep it from the hinges of your door by regularly cleaning them and lubricating them.

When you are removing the hinges, it's best to do so fully to get into all the little nooks and crannies to scrub off any corrosion. After the hinges have been cleaned and dry, you can apply a mix of oil and vinegar to further lubricate them and aid in helping keep them safe from corrosion. This is an inexpensive and simple solution that can find in the majority of homes. It's worth a try before replacing your hinges.

Doors that won't close

Over time, doors may become misaligned due to the expansion and contraction of wooden frames. This can cause the door catch on the corners or to latch when you close it. This issue can be resolved with a little work. If you are able to tighten the hinges and adjust the issue, your door will likely close properly again.

Start by inspecting the hinges for loose screws. The loose screws can cause the hinge to sag and create a gap between the leaf of the hinge and the jamb. This can cause the latch not to reach the strike plate's hole, and lead to a jammed door.

To fix this, take off one of the hinge screws and slide a strip of cardboard (we prefer using the backs of old legal pads) between the hinge and the door jamb. Then screw the hinge back into place. windows company cambridge will increase the gap on the hinge's side, and narrow it down on the latch side which allows the latch to be free of the strike plate. If this resolves the issue then repeat the process on the remaining hinges.

If tightening the hinges, and using longer screws to fix the alignment of your strike plate holes does not solve the issue it may be necessary to shim or hammer the strike plate to make it align with the hole for latching. If this is the case then a small amount of paint or wood filler is usually enough to cover the changes.

Physical damage or long-term usage can also cause the strikeplate to be bent or warped that can cause it to touch the edge but not go far enough into the hole to secure the door. Apply lipstick to the latch and then apply an edging strip onto the strike plate. Close the door and open it. The lipstick will leave a trace on the tape where the latch contacts the strike plate's hole. If the mark is below the hole, then your latch should be moved upwards.

Read More: https://www.repairmywindowsanddoors.co.uk/cambridge-windowrepair/