Notes

17 Signs To Know If You Work With Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need to open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.

Continue can also become loose. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism wears out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will make your window more difficult to clean and decrease its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in the breeze. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple procedure, but it is simpler if you have someone to help hold the frame up.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you suggestions.


It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges may also become misaligned due to wear, which can cause gaps where the sash meets frame. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, may also be misaligned, and again it may be feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a life span and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.

Homepage: https://click4r.com/posts/g/14177155/