Notes

20 Trailblazers Setting The Standard In Window Repair
Window Repairs

Window repairs can help homeowners save money and keep their homes warm. Window replacements may be required in the event of severe damage, such as broken glass or a broken window frame.

But many other issues can be addressed to extend the lifespan of your windows. Common problems include:

Cracked or broken Panes

It's a rock that's been that was tossed by your lawnmowers or a tree branch blown by strong winds, cracked window glass is not only ugly, but it can also result in higher electric bills since the broken pieces let cold air into your home. Luckily, it's typically easy to fix windows with cracked panes.

Begin by carefully removing the glass using gloves and glasses. You may have to use an utility knife to loosen old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood with a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is waterproof around the frame's perimeter. This helps prevent water from getting into the crack, which could cause further damage to both the frame and the glass.

A bad crack in double-paned glass could compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is so severe that it is threatening the structural integrity of the window or if the inner pane is missing you might need to call an expert.

Cracks in the glass caused by thermal stress may occur when there is an extreme temperature difference between your home and the outside. The glass is then able to expand and contract. If this happens on two windows, it's probably best to simply replace the pane instead of attempting to repair it.

If your windows are cracked and not yet ready to be replaced clear tape can do a decent job of securing the crack and preventing the entry of bugs and cold air. You can also cut the length of a nylon stocking to completely cover the crack and glue it with duct tape. This is not an end-to-end solution, but it can keep insects out and cold air away from your home. If you notice cracks appearing on your older windows, you should check with your local company to see if replacing the whole window is a better option.

Rotten Wood

Wood rot is one of the most frequent problems that plague windows. It can ruin a house's appearance and create a safety hazard. It is possible to fix rotted wood. First, you must identify the cause of the wood decay. Examine for leaks in the roof and other areas where water can enter the wood.

The next step is to take off the rotten parts of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After you have removed the decayed wood, you'll need to replace it with fresh wood. It is recommended to choose treated wood for this project since it is more resistant to rot. If you are not able to replace the wood damaged by rot, you can try using wood filler or hardener to strengthen the damaged area. Most hardware stores will sell this kind of product. To get the best results, make sure you follow the directions on the label.

After you have repaired the rotten areas of the windowsill, it is essential to protect the newly-repaired area. Apply a water-resistant sealant on the wood. A product such as Sikkens is a great choice for this job.

Use a two-part epoxy to protect the wood against further damage. This product is easy to apply and leaves a nice finish. However, it's important to follow the application instructions on the label. Once the epoxy filler has dried you can sand the surface of the wooden. Start with a rough sandpaper then move on to an easier grade.

The last thing you want to do is to make the area that has been damaged by exposing it to more water. Therefore, it is a good idea to cover the area that has been repaired with an oil-based primer that will shield it from moisture. Then, you can reapply the wood sealant, which is waterproof.

Won't Open

There are many reasons windows won't open. Wood frames can warp in rainy weather, or the house might have sunk or someone may have nailed it shut for security reasons. However, with a little patience and the right tools, many windows that are stuck can be opened.


One of the most common causes of a window that isn't opening is the accumulation of debris or gunk on its moving parts. Dirt and grime build up on the sliding tracks, hinges, and locks over time, says Acme Glass. Additionally, window repairs near me made of metal may get rusty when in contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease will help prevent oxidation and keep your window functioning properly.

Stuck windows can also be the result of a loosening or breakage of the pulleys used to raise and lower the window. These components can lose their tension and cause obstruction particularly when the window is two or more stories higher than the ground.

If you are having trouble opening the window Try using a pry bar to gently push the window open a little at each time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Alternatively, try running a hair dryer across the edges of the frame for several minutes to warm the wood and allow it move more easily.

A broken spring could be the reason for windows that aren't able to raise or lower. You will need to consult the owner's manual for more details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving components on your windows, but they still won’t open, then it may be time to replace windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let your windows go from functional to inoperable, as windows that aren't properly closed can leave your home vulnerable to burglary and water damage. Contact us today for more information on our replacement windows and our services!

Here's my website: https://blogfreely.net/flaxblack34/10-tips-for-window-repairs-that-are-unexpected