Notes

Repairs To Upvc Windows: What's The Only Thing Nobody Is Discussing
Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your home until a professional arrives to fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. Over time, they can be affected by a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sagging. You'll first need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need close the window and perform an experiment fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if get up each morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer can be applied. When it comes to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease, it may be the hinges that are at fault. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do when you have a person to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to give advice.


Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause an opening to appear where the sash joins the frame. They can be fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. In addition, the interlock could be misaligned. This is located on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace them.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. window repairs near me will help to stop cold air from entering and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it could be more cost-effective to replace them than to repair them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.

Website: http://sc.sie.gov.hk/TuniS/www.repairmywindowsanddoors.co.uk/hayes-windowrepair/