Notes

Window Repair Explained In Fewer Than 140 Characters
Window Repairs

Window repairs can help homeowners save money and maintain their comfort. In the event of major damage, such as broken glass or a cracked frame, a replacement window may be necessary.

But there are many other issues that can be fixed to prolong the lifespan of your windows. The most frequent issues are:

Cracked or broken Panes

Cracked window glass can be caused by a lawnmowers that throws errant rocks or by the blow of a tree branch by strong winds. This is not only visually terrible, but it could cause higher energy bills because the broken pieces allow cold air in to your home. It's relatively easy to repair windows that have broken panes.

Begin by carefully removing the glass using gloves and safety glasses. You may have use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to wipe the glass's surface and the wood of the frame.

Once click home page is clean, apply a waterproof silicone caulking around the frame's perimeter. This will prevent water from entering the frame through the cracks and cause further damage.

If you have double-paned glass, cracks that are not treated properly could weaken the gas layer between the panes and make your windows less insulative. If the crack is significant enough to cause damage to the quality of the glass or the glass has an inner pane completely missing, it's the time to call a professional.

Cracks in the glass caused by thermal stress may occur when there is a significant temperature difference between your home and the outside. The glass is then able to expand and shrink. If the cracks are on two sides of a window it is best to replace it rather than try to repair it.


Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It also keeps out bugs and cold wind. You can also cut an area of nylon stocking or tarp large enough to cover the crack and stick it to the wall using duct tape. This isn't an indefinite solution, but it can keep cold air out and insects away from your home. If you notice cracks appearing on your older windows, you should check with the local company to determine whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a frequent issue with windows. It can ruin a house's appearance and pose a safety risk. It is possible to repair damaged wood. First, you need to make sure that the root of the rot has been addressed. This can be done by looking for leaks in the roof, missing gutters or cracked caulking, as well as other areas which allow water to penetrate the wood.

Next, you will need to take out any rotten parts of the window frame. This can be done with a claw hammer, chisel or a rasp. After removing the decayed wood, you'll need to replace it with fresh wood. It is recommended to choose treated wood for this project as it will be resistant to decay. If you cannot replace the rotted timber, you can use filler and wood hardener to repair the damaged area. This type of product will be found in a lot of hardware stores. To get the best results, adhere to the instructions on the product label.

Once you have repaired the rotten areas of the windowsill, it's crucial to safeguard the newly repaired area. Apply a water-resistant sealant the wood. Sikkens for instance is a fantastic product to apply.

Use a two-part epoxy in order to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it's important to adhere to the instructions for application on the label. Once the epoxy filler has dried, you can smooth the surface of the wood. It is recommended to begin with a rough grade of sandpaper and then move to a smoother one.

You don't want to expose the damaged part to further moisture. It is recommended, that's why you should cover the repaired surface with an oil-based primer which will shield it from water. Then, you can reapply waterproof wood sealant.

Won't Open

The reason a window won't open can be caused by various factors. The house may have settled or the wooden frames may have warped in humid weather. Somebody may have put them in place to protect themselves. With a little patience and the right tools you can open most stuck windows.

One of the most frequent causes of a window that won't open is accumulated gunk or debris on its moving parts. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks, and locks. Metal hardware can also rust when it comes into contact humidity and direct sunlight. Spraying grease on these areas will aid in preventing oxidation and keep your windows functioning well.

The pulleys that raise or lower the window may become loose, or even break. These components can lose their tension and cause obstruction, especially when the window is situated two or more stories above the ground.

If in the know having difficulty opening windows try using a pry bar to gently force the window to open a bit at a time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Alternatively, try running a hair dryer along the edges of the frame for a few minutes to warm the wood and assist it to move more easily.

A broken spring could be the cause of windows that don't lift or lower. You'll need to check the owner's manual for more details based on the manufacturer of your windows.

If you've tried cleaning the moving parts of your windows and then lubricating them but they still won't open, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to inoperable, as a window that isn't properly shut could leave your home vulnerable to water damage and burglary. Contact our team today to learn more about our replacement windows and our services!

Here's my website: https://www.mixcloud.com/fielddrum48/