Notes

Difficulty Problem And Solutions Of Floating Fish Feed Machine
Problem Problem And Also Solutions Of Floating Fish Feed Maker

Your floating fish feed equipment will certainly come out various problems after it functioned a very long time, or because of your incorrect operation, your fish feed equipment has occured problems or not working well also quit working.

Typical problems are low manufacturing outcome, expensive puffing or not sufficient puffing, as well as poor pellet forming, against these problem problems, especially on bad pellet forming problem, a few of our customers met this kind of problem, some due to resources formula, some due to wrong procedure, as well as in right here we will offer some troubleshooting and services for you.

Solutions Of Low Production Result

1. The screw head is used greatly, please transform the screw head or the entire screw

2. used animal feed pellet mill for sale of the extrusion chamber is put on significantly, please alter the bushing in the extrusion chamber

3. If you altered the formuation or not? for sinking type pellets: starch content portion: ≥ 20%, for floating type pellets: starch material percentage: ≥ 10%. Additionally: Specifically for floating materials, the material of pet healthy protein need to not be too high.

The duty of starch:

1) Starch has solid water absorption;

2) The gelatinized starch can improve the viscosity of the product

3) Dual function of puffing as well as binding in the last pellets

The function of healthy protein:

1) Healthy protein has water absorption, elasticity and also coagulation

2) Healthy protein is divided into: veggie protein and also pet healthy protein, Formulas having vegetable healthy protein are typically easier to refine than those consisting of pet healthy protein. Since pet protein is not as very easy to incorporate with other active ingredients or mass as vegetable protein or starch


4. Is paper pellet machine price of the die is suitable or not?

A= 1aperture area area= πr2, 10holes-8mm die 8mm diameter= 4mm redius.

area= πr2, 3.14 × 16= 50.24 mm2.

10 holes × 50.24= 502.4 mm2.

Solutions Of Expensive Puffing Or Not Sufficient Puffing.

1. The raw materials are blown much as well extremely.

1) the conditioner temperature level is too high( for wet type machine).

2) The turning rate of the host equipment is expensive.

3) Too much or too much less water included the raw materials or in the conditioner.

4) the holes of the die mould is blocked.

2. The blowing degree of the product is inadequate.

1) The extruder production ourput is low.

2) The conditioner temperature level is not enough high.

3) The turning speed of the host equipment is as well low.

4) The heating plate temperature level in the extrusion chamber is too low.

5) Water web content is also low in the conditioner or in the raw product.

6) Have you ever transformed the formula.

3. Poor pellet creating.

1) The raw products solution is not so excellent.

2) The functioning temperature level is expensive or too low.

3) Feeding basic materials is not stabilized.

4) The cutting rate is not right, too expensive or as well low.


5) The cutting blades are put on.

6) The size of powder raw materials is too big, you can check below the raw materials size need.

small wood pellet machine φ (mm) grinding excellence needed.

1.095% reach to 90-100 mesh.
1.595% reach to 80 mesh.
2.095% reach to 80 mesh.
3.095% reach to 60 mesh.
4.095% reach to 60 mesh.
5.095% reach to 60 mesh.

4. The final pellets are harsh surface as well as different sizes.

1) Some partial holes of the die mould are blocked.

2) The finness of the raw products is not nearly enough.

3) The raw products conditioning is bad.

4) The quality of the die mould holes is poor.

5) The cutting blades are worn.

6) The water portion in the raw products is not remedy.

5. The extrusion temperature is as well low.

1) The steam conditioning temperature is too low (for wet kind maker).

2) The vapor inlet pipe of the puffing chamber is blocked or the temperature level of the electrical heating device is inadequate( for wet kind maker).

3) Jacketed vapor line (trap) plugged( for damp kind machine).

4) The temperature level of the electric heating plate is also low or the electrical heating switch is not switched on.

5) Resources moisture is too high.

6. Particles are blocked prior to exiting the die hole.

1) The bit dimension of the raw material is as well big about the size of the die hole.

2) The quantity of water is not enough to make the material flow.

3) The screw pole is used considerably.

4) The feeding inlet is blocked.


Homepage: https://pelletmachinemaker.com/choose-the-right-sinking-fish-feed-pellet-mill/