Notes

Problem Trouble And Solutions Of Floating Fish Feed Equipment
Problem Problem And Solutions Of Floating Fish Feed Equipment

Difficulty Problem Of Fish Feed Equipment

Your floating fish feed machine will certainly come out various problems after it worked a long period of time, or due to your wrong operation, your fish feed maker has occured issues or not working well even stopped working.

Common problems are reduced production output, too expensive puffing or not adequate puffing, and also poor pellet developing, against these problem problems, specifically on poor pellet creating problem, several of our clients satisfied this sort of problem, some because of basic materials solution, some because of wrong operation, and in right here we will certainly provide some troubleshooting and options for you.

Repairing Of Fish Feed Maker



Solutions Of Low Production Result

1. The screw head is worn substantially, please change the screw head or the whole screw

2. The bushing of the extrusion chamber is used substantially, please transform the bushing in the extrusion chamber

3. If you changed the formuation or not? for sinking kind pellets: starch web content portion: ≥ 20%, for floating kind pellets: starch content percent: ≥ 10%. In addition: Especially for floating materials, the material of pet protein must not be expensive.

The role of starch:

1). biomass pellet machine has solid water absorption;

2). The gelatinized starch can enhance the viscosity of the material

3). Double function of puffing as well as binding in the final pellets

The role of healthy protein:

1). Protein has water absorption, flexibility and also coagulation

2). Protein is separated right into: veggie protein and pet healthy protein, Solutions including vegetable protein are typically less complicated to refine than those consisting of animal healthy protein. sawdust pellet press to the fact that animal healthy protein is not as simple to incorporate with various other active ingredients or mass as vegetable protein or starch

4. Is the aperture area of the die is suitable or otherwise?

A= 1aperture area area= πr2, 10holes-8mm die 8mm diameter= 4mm redius.

area= πr2, 3.14 × 16= 50.24 mm2.

10 holes × 50.24= 502.4 mm2.

Solutions Of Too Expensive Puffing Or Otherwise Sufficient Puffing.

1. the raw materials are puffed much also extremely.

1) the conditioner temperature is too high( for damp kind machine).

2) the turning speed of the host maker is too expensive.

3) way too much or too much less water added in the raw products or in the conditioner.

4) the holes of the die mould is obstructed.

2. The puffing degree of the product is inadequate.

1) the extruder manufacturing ourput is reduced.

2) the conditioner temperature is not enough high.

3) the rotating rate of the host maker is as well reduced.

4) the heating plate temperature in the extrusion chamber is as well low.

5) water material is also reduced in the conditioner or in the raw material.

6) have you ever changed the solution.

3. Poor pellet forming.

1) the raw materials formula is not so excellent.

2) the functioning temperature is too high or also low.

3) feeding raw materials is not balanced.

4) the reducing speed is not right, too expensive or also reduced.

5) the cutting blades are used.

6) the dimension of powder basic materials is too big, you can check below the raw products dimension demand.

die mold aperture φ (mm) grinding fineness required.
1.095% reach to 90-100 mesh.
1.595% reach to 80 mesh.
2.095% reach to 80 mesh.
3.095% reach to 60 mesh.
4.095% reach to 60 mesh.
5.095% reach to 60 mesh.

4. The last pellets are harsh surface and also various sizes.

1) some partial holes of the die mould are obstructed.

2) the finness of the raw products is not enough.

3) the raw materials conditioning is not good.

4) the quality of the die mould holes is poor.

5) the reducing blades are worn.

6) the water portion in the raw products is not correct.

5. The extrusion temperature is as well reduced.

1) the steam conditioning temperature is too reduced (for damp kind equipment).

2) The steam inlet pipe of the puffing chamber is blocked or the temperature of the electrical home heating tool is insufficient( for wet kind machine).

3) Jacketed steam line (trap) plugged( for wet kind equipment).

4) The temperature level of the electrical home heating plate is too reduced or the electrical heating switch is not turned on.

5) Resources dampness is too high.

6. Fragments are obstructed prior to leaving the die hole.

1) The particle size of the raw product is also large relative to the dimension of the die hole.

2) The quantity of water is inadequate to make the material circulation.

3) the screw rod is put on greatly.

4) The feeding inlet is blocked.


Website: https://woodpelletpressmachine.com/fish-feed-machine-be-used-for-small-scale-aquaculture-operations/