Notes

These Are The Most Common Mistakes People Do With Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the old frame very easily. However, if windows with double panes are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled.


It's a great idea tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional is able to fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap between the window and the door is significant, you may prefer an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As window repairs , they may develop a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window so that you can get to the frame. With an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in place.

If window repair near me are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. The majority of the time this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any DIY expert. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be applied. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it blows open with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. Changing a window hinge is essentially a very simple process but it can be simpler with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain manner or because of poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to give suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear could become misaligned. window repair causes gaps to develop where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. Secondly the interlock, this is located on the hinge of the window and can also become misaligned, again it may be feasible to give them a clean but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will lessen draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be placed on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.

Here's my website: https://efficient-wombat-h5mv47.mystrikingly.com/blog/10-window-glass-repair-near-me-that-are-unexpected