Notes

10 Things We Do Not Like About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. However when you have double-pane windows that are held in place by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the distance between the window and the door is significant, you may want to use an alarm system that has a window. This will provide the best of both.

2. Sagging


Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the fit of the window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it can also be caused by the handle mechanism wears out. Fortunately, it's easy to fix the loose uPVC window handle yourself. The first step is to close the window and perform an initial test fit. The corner joints of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and floors that are wet. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking might need to be removed. It is important to remember that when it is about uPVC window repair s, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze, it may be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is an easy process, but it's simpler with someone else to help you hold the frame up.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should open.

The issue can be caused by opening the window improperly or due to a poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop where the sash meets the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to replace them instead of fixing them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.

Homepage: https://cutt.ly/8wDmmk0h