Notes

17 Reasons You Shouldn't Beware Of Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However If you have double pane windows that are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and fix the window. window repairs acts as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. After that, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fitting. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you can't reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. The first step is to close the window and then perform a test fit. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This can make your window harder to clean and decrease its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease it could be the hinges that are at fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change the hinges on a window, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation in the factory. Sending us photos via our website will often solve the issue. We are more than happy to give assistance.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges can also become disaligned as a result of wear, causing a gap between the frame and sash. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it's feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.


The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a life span and there may come the point when it's more economical to replace them than repair them. If you have any problems with your window made of upvc you should consult an expert as soon as you can.

My Website: https://www.repairmywindowsanddoors.co.uk/chesham-windowrepair/