Notes

10 Things Everyone Hates About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass


The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap is large, you may want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be due to the mechanism of the handle wearing out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer can be applied. When it is time to uPVC repair, you should avoid 'over-caulking'. This will make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal rather than the frame. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be the hinges that are at the fault. These are easily replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change a window hinge but it's much easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue could be caused by opening the window incorrectly or by a poor installation at the factory. This issue can be fixed by sending us a picture on our website. We will be more than happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. upvc window repairs or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also become unbalanced due to wear, causing an opening where the sash and frame meet. This can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it's possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.

Homepage: https://ctxt.io/2/AADQFLS9EA