Notes

The Biggest Issue With Double Glazing Door Lock Repairs, And How You Can Fix It
Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC window or door mechanism broken? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to operate.

You'll be wasting energy in the event that your double-glazed doors fail to function properly. This can also increase the likelihood of burglaries. Owen the Locksmith can repair your door lock at a reasonable cost.

Snapped Key

It can be a hassle when a key is snapped inside a lock. It also poses an issue for security, since the door might not lock and leave you vulnerable to intruders. There are fortunately quick fixes that you can try to resolve the problem and get your door functioning correctly.

Be calm. If you panic and start doing a lot of fumbling around you may end up pushing the damaged piece of the key even further into the lock, which could make the situation much worse.

Spray WD-40, or any other penetrating lubricant into the lock. This will assist the broken piece to emerge more easily. You can also use a screwdriver to help break up any pieces stuck that could be blocking the way. If you have a chunk of the key that's still sticking out and is not being removed, grab it with a paperclip or other thin metal object and pull it. Both methods work, but be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as hook extractors and some Jigsaw blades also work for this use. If you don't have any of these items, you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers can be used to grip and pull out the remaining part of the broken key.

If you can't get the broken piece of the key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these solutions work, it could be time to contact a locksmith. Fitlocks experts can quickly solve problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair via our website or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can be a serious security risk. Luckily, it's an easy repair for a professional locksmith to complete. To fix the cylinder, locksmiths will need to tap it. This can be done using the hammer or other tool. However, the best method is to employ a wire or long match. Then, position the match's tip or wire close to the keyway. The locksmith will then hit the lock to break it. This is far better than using a heavy hammer that can harm the lock.

The most common cause of cylinder head cracks is overheating. This can happen when the cylinder block and cylinder head are made from different metals, such as cast iron and aluminum. Different metals can be heated and cool at different rates. This can cause localized hotspots to expand quicker than the rest of the cylinder.


Another possible cause of cracks in the cylinder is corrosion. If the cylinder head and the block of the cylinder are not properly maintained, it can result in corrosion or rust that could cause them to expand at a greater rates than they ought to. Over time, this can cause cracks.

If your uPVC door or window lock is brittle or requires a lot of pressure to turn, it can be the result of a number of things. A malfunctioning locking mechanism, misalignment or an old handle are the most common causes of this problem.

This is a straightforward and cost-effective fix that a majority of double glazing owners can accomplish. A professional locksmith will usually solve the issue within one hour of arriving at your property. They can replace the locking mechanisms, or replace the window handles and change the gearboxes, depending on your specific needs. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They can even recommend upgrades to the highest-security 3 Star Euro cylinders, TS007, that will give you an additional layer of protection against burglars. It's a small price to pay for the security that comes with knowing your uPVC doors are secure.

Broken Handle

It's not surprising that window handle locks could break. They are equipped with complex mechanisms which deteriorate over time. It isn't easy to determine the reason behind the broken window handle lock and then fix it properly.

Fixing your broken handle, whether it's the internal locking mechanism or latch can increase the security of your uPVC door and reduce the risk of draughts. It is costly to replace or repair the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

With the window open, loosen the screw that secures the handle by using a screwdriver. double glazing repairs near me should be on the inside of the back plate, which is usually concealed by a screw cover for aesthetic reasons. Be careful not to lose any of the internal components inside the handle, for example the plates or levers on either side of the spindle. Ideally, keep these in the same order so you can re-install them in the event of a need.

Then, with an additional screwdriver take the screw off that holds the handle to the spindle on the back. Once the screw is loose, remove the handle and take the broken spindle out. Replace it with a new spindle, ensuring it's the same length (you can purchase them online or at hardware stores). Screw it in the frame. Be careful not to overtighten as this could damage the handle or the window frame.

Check that the new handle is correctly fitted Close the window and test the handle. It should operate smoothly, and you will be able to open your windows once more.

Don't forget to double-check that your uPVC window is shut correctly while you're working with the handle. If they aren't closing correctly, you could encounter draughts or damp in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure they close correctly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate an electronic locking mechanism within the window frame. The handle is connected to a centre rod that in turn activates mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has broken, this can be an extremely frustrating issue.

Fortunately there are options to rectify this issue. A good locksmith can quickly and effectively fix this problem. They will be able to take apart the window handle using a tool that removes the wheel part of the mechanism, where the spindle goes. This is done without damage to the handle or window frame.

After removing the wheel, the technician can examine the spindle and identify the cause of the break. This involves breaking down the spindle into its individual parts and carefully recording their general condition, as well as any particular areas of wear or damage. This procedure is typically carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle. This assists in removing any dirt or debris that might be hindering its normal functioning. The spindle could be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is the same size to the original. He will then drill matching holes into both pieces. This will ensure that the new spindle has precisely matched to the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centres sell generic replacements. However, if double glazing repairs near me of your window is rare then it is necessary to find a woodworker or cabinet maker who can replicate the exact model for you. After the spindle is installed, it can be connected to the handle. The screw holes on the handle to the existing screws in the frame. Once the handle is securely seated, you can operate your uPVC windows.

Read More: https://www.instapaper.com/p/powerturn3