Notes

10 Misconceptions That Your Boss May Have About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. However If windows with double panes are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the distance between the window and the door is large, you might need to consider an alarm system that includes windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A sagging uPVC window can cause problems with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the size of the window, tighten the screws to hold them in place.


If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, upvc window repairs can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the old caulking might need to be removed before a fresh layer is applied. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in a breeze. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It is essentially a very simple process but it can be simpler with someone else to help you hold the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. Firstly the hinges, again due to wear and tear can become misaligned, this will cause gaps to develop between the sash and the frame. If they are beyond repair, it could be necessary to get them re-aligned. Second, the interlock can be disaligned. This happens on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and lessen the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some sort of filler and can be placed on the windowsill on top. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to replace them than to repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.

Here's my website: https://candid-corn-gq6nhl.mystrikingly.com/blog/15-gifts-for-the-pvc-window-repairs-lover-in-your-life