Notes

DowngradingUpgrading Xiaomi MIUI Version Using Mi Flash Tool


Are you looking to bring your Xiaomi MIUI version to new heights or take a step back? Look no further than the Mi Flash Tool!

With its help, you can effortlessly downgrade or upgrade your Xiaomi MIUI version. Imagine having the power to customize your device's software to suit your preferences, all at your fingertips.

No need to worry about complex processes or tedious steps - the Mi Flash Tool simplifies the entire process for you. By following a few simple instructions, you'll be able to easily navigate through the process of downgrading or upgrading your Xiaomi MIUI version.

So why wait? Let's dive in and unlock the full potential of your Xiaomi device!

Required Tools and Downloads
To begin downgrading or upgrading your Xiaomi MIUI version using Mi Flash Tool, you'll need a few essential tools and downloads.

First, make sure you have a reliable USB cable to connect your Xiaomi device to your computer. This will allow for data migration during the process.

Next, download the latest version of Mi Flash Tool from the official Xiaomi website. Ensure that you have the appropriate USB drivers installed for your device. These can also be downloaded from the Xiaomi website.

It's crucial to have a stable internet connection to prevent any interruptions during the flashing process. Additionally, it's recommended to have a backup of your data before proceeding with the downgrade or upgrade. This will help you avoid any potential data loss.

Lastly, familiarize yourself with troubleshooting tips and guidelines provided by Xiaomi to address any issues that may arise during the process.

Backup Your Device
Before you begin downgrading or upgrading your Xiaomi MIUI version using Mi Flash Tool, it's important to back up your device. This will ensure that you don't lose any important data during the process. To backup your device, follow these steps:


Connect your Xiaomi device to your computer using a USB cable.
Open the Mi PC Suite on your computer.
Click on the 'Backup' tab in the Mi PC Suite.
Select the data that you want to backup, such as contacts, messages, photos, and apps.
Click on the 'Start' button to begin the backup process.
Wait for the backup to complete.
Once the backup is finished, disconnect your device from the computer.

Now that you have successfully backed up your device, you're ready to proceed with downgrading or upgrading your Xiaomi MIUI version using Mi Flash Tool. If anything goes wrong during the process, you can easily restore your data using the backup you just created.

Unlocking Bootloader
Unlock your Xiaomi device's bootloader to prepare for downgrading or upgrading the MIUI version using Mi Flash Tool. Unlocking the bootloader is an essential step in the flashing process, as it allows you to install custom ROMs or modify system files. Here's how you can do it:



Firstly, enable Developer Options on your Xiaomi device. Go to Settings > About phone > tap on MIUI version multiple times until you see a message saying 'You are now a developer!'



Next, go back to the main Settings menu and open Developer Options. Scroll down and find the option for 'OEM unlocking' or 'Unlock bootloader.' Enable this option.



Now, you need to request the bootloader unlock permission from Xiaomi. Visit the Xiaomi bootloader unlock website (http://en.miui.com/unlock/) and apply for the permission. Follow the instructions provided, and you'll receive a code on your registered mobile number.



Download the Mi Unlock Tool on your computer and extract the files. Open the tool and sign in with your Mi account.



Power off your Xiaomi device and boot it into Fastboot mode by pressing the Volume Down and Power buttons together.



Connect your Xiaomi device to the computer using a USB cable.



In the Mi Unlock Tool, click on 'Unlock Now' and follow the on-screen instructions. Enter the unlock code you received earlier.



The tool will now start the bootloader unlocking process, which may take a few minutes. Once it completes successfully, you can disconnect your device from the computer.



Congratulations! You have successfully unlocked the bootloader of your Xiaomi device. Now you can proceed with downgrading or upgrading the MIUI version using Mi Flash Tool.

Download and Install Mi Flash Tool
Now that you have successfully unlocked the bootloader of your Xiaomi device, you can proceed to download and install Mi Flash Tool. Mi Flash Tool is a software developed by Xiaomi that allows users to flash custom ROMs, recoveries, and fix bricked devices.

Follow the steps below to download and install Mi Flash Tool on your computer:


Open your web browser and search for 'Mi Flash Tool download'.
Click on the official Xiaomi website link that appears in the search results.
Look for the 'Downloads' section on the Xiaomi website and click on 'Mi Flash Tool'.
Choose the latest version of Mi Flash Tool and click on the download link.
Once the download is complete, locate the downloaded file on your computer and double-click on it to start the installation process.
Follow the on-screen instructions to complete the installation.
After the installation is finished, you can launch Mi Flash Tool and start using it to install custom ROMs or fix bricked devices.

Download MIUI ROM Version
To download the MIUI ROM version, you'll need to visit the official Xiaomi website and select the desired ROM for your device. Here's how you can do it:


Go to the Xiaomi website and navigate to the MIUI ROM download page.
Look for your device model and select the appropriate ROM version.
Make sure to download the stable version of the ROM to avoid any potential issues.
Once you have selected the ROM, click on the download button to start the downloading process.
The ROM file will be downloaded in a compressed format, so you'll need to extract it using a file extraction tool.
After extracting the ROM file, you'll have the firmware file ready for the flashing process.

Now that you have successfully downloaded the MIUI ROM version, you can proceed to the next step of the downgrading or upgrading process using the Mi Flash Tool.

Enter Fastboot Mode
To enter Fastboot Mode on your Xiaomi device, you'll need a few requirements.

Firstly, make sure that you have:
- A USB cable
- A computer with the necessary drivers installed

Secondly, ensure that your device is powered off before proceeding.

In the next section, we'll discuss the step-by-step process of entering Fastboot Mode on your Xiaomi device.

Fastboot Mode Requirements
To enter Fastboot Mode on your Xiaomi device, you'll need to power the device off and then simultaneously press and hold the Volume Down button and the Power button.

Fastboot Mode is a useful tool for troubleshooting your device or installing custom firmware. It allows you to flash system files, recoveries, and other partitions on your Xiaomi device.

If you're having trouble entering Fastboot Mode, there are a few troubleshooting steps you can try.

First, make sure your device is powered off before attempting to enter Fastboot Mode. If that doesn't work, try using a different USB cable or port.

If you're unable to enter Fastboot Mode, there are alternative methods you can use, such as using ADB commands or using a dedicated Fastboot tool.

Fastboot Mode Process
To enter Fastboot Mode on your Xiaomi device, simply power the device off and simultaneously press and hold the Volume Down button and the Power button.

Fastboot mode is a useful tool for various tasks such as flashing custom ROMs, unlocking the bootloader, and installing system updates. By entering mi flash , you gain access to a lower-level interface that allows you to interact directly with the device's bootloader. This mode enables you to perform advanced actions that aren't available in normal operating mode.

However, it's important to note that Fastboot Mode has its limitations. While it provides powerful functionality, it also carries the risk of potential data loss and device damage if not used correctly. Therefore, it's crucial to follow instructions carefully and proceed with caution when using Fastboot Mode.

Flashing MIUI ROM Using Mi Flash Tool
You can flash the MIUI ROM using Mi Flash Tool. This tool allows you to install the ROM on your Xiaomi device, whether you want to downgrade or upgrade the version.

Here's a step-by-step guide on how to flash the MIUI ROM using Mi Flash Tool:


Download and install the Mi Flash Tool on your computer.
Enable USB debugging on your Xiaomi device.
Power off your device and boot it into Fastboot mode.
Connect your device to the computer using a USB cable.
Open the Mi Flash Tool and select the ROM file you want to flash.
Click on the 'Flash' button to start the flashing process.
Wait for the process to complete and then disconnect your device.

If you encounter any issues during the flashing process, here are some troubleshooting tips:


Make sure you have installed the correct USB drivers for your Xiaomi device.
Try using a different USB cable or USB port.
Restart your computer and try again.
If the flashing process fails, try flashing a different ROM file.

Reboot Your Device
After completing the flashing process, you can now reboot your device. Rebooting your device is an essential step to ensure that the changes made during the flashing process take effect.

However, sometimes you may encounter rebooting issues, such as the device not restarting or getting stuck in a boot loop. In such cases, there are a few troubleshooting steps you can try.

First, try a soft reset by holding down the power button until the device powers off and then turning it back on. If that doesn't work, you can try a hard reset by holding down the power button and volume down button simultaneously for about 10 seconds until the device vibrates.

If the issue persists, you may need to consult a professional or contact Xiaomi customer support for further assistance.

Restoring Data and Settings
Now that you have successfully downgraded or upgraded your Xiaomi MIUI version using the Mi Flash Tool, it's time to restore your data and settings.

This process involves backing up your important data before the downgrade or upgrade, and then restoring it once the process is complete. In addition, there are some useful data migration tips that can help ensure a smooth transition to the new version without any loss of data or settings.

Let's dive into the step-by-step process of backing up and restoring your data.

Backup and Restore Process
To initiate the backup and restore process for restoring data and settings, begin by backing up your Xiaomi device using the Mi Flash Tool. Regular backups are crucial as they ensure that your valuable data and settings are safe in case of any unforeseen circumstances.

Follow these steps to secure and encrypt your backup files:


Connect your Xiaomi device to your computer using a USB cable.
Launch the Mi Flash Tool on your computer.
Click on the 'Backup' tab in the Mi Flash Tool interface.
Select the data and settings you want to backup.
Choose a secure location on your computer to save the backup files.
Enable the encryption option to protect your backup files with a password.
Click on the 'Backup' button to start the backup process.
Wait for the backup process to complete.
Once the backup is finished, you can safely restore your data and settings using the Mi Flash Tool whenever needed.

Data Migration Tips
To ensure a smooth data migration and restoration of your settings, follow these tips using the Mi Flash Tool.

Data migration can present challenges, but with the right methods, you can transfer your data seamlessly. Here's how:



Before starting the migration process, make sure to backup all your important data, including contacts, messages, photos, and apps. This will ensure that you have a safe copy of your data in case anything goes wrong.



Connect your Xiaomi device to your computer using a USB cable and launch the Mi Flash Tool.



Select the appropriate firmware version that you want to downgrade or upgrade to.



In the Mi Flash Tool, choose the 'Clean all' option to wipe all data on your device. This is necessary to avoid any compatibility issues between different firmware versions.



Click on the 'Flash' button to begin the data migration process. The tool will automatically transfer your data and settings to the new firmware version.



Troubleshooting and Tips
If you encounter any issues while downgrading or upgrading your Xiaomi MIUI version using Mi Flash Tool, follow these troubleshooting tips.

For common MIUI version downgrade issues, make sure to check that the ROM you're trying to flash is compatible with your device model. Also, ensure that you have enabled USB debugging and unlocked the bootloader.

If you're experiencing troubles during the MIUI version upgrade, try using a different USB cable or port. It's also recommended to disable antivirus software and firewall temporarily.

Additionally, ensure that your device has enough battery power and that you have downloaded the correct ROM for your specific device model.

Frequently Asked Questions
Can I Downgrade My Xiaomi MIUI Version Without Unlocking the Bootloader?
No, you cannot downgrade your Xiaomi MIUI version without unlocking the bootloader. Unlocking the bootloader is a necessary step to modify the software on your device, including downgrading the MIUI version.

Will Downgrading or Upgrading My MIUI Version Affect My Device's Warranty?
Downgrading or upgrading your MIUI version on Xiaomi devices may potentially affect your device's warranty. It is important to backup your data before proceeding with the steps to avoid any potential risks.

Is It Possible to Use Mi Flash Tool to Downgrade or Upgrade MIUI on a Different Brand of Android Device?
Yes, you can use Mi Flash Tool to downgrade or upgrade the MIUI version on your Xiaomi device without unlocking the bootloader. It is a useful tool for flashing custom ROMs on Xiaomi devices.

Can I Use Mi Flash Tool to Flash Custom ROMs on My Xiaomi Device?
Yes, you can use Mi Flash Tool to flash custom ROMs on your Xiaomi device. The flashing process involves a few steps but offers benefits like improved performance, customization options, and access to new features.

What Should I Do if My Device Gets Stuck in the Boot Loop After Flashing a New MIUI Version?
If your device gets stuck in a boot loop after flashing a new MIUI version, there are possible solutions to fix it. Follow these troubleshooting steps: 1) Try rebooting into recovery mode, 2) Wipe cache partition, 3) Perform a factory reset.

Read More: https://www.xiaomiflash.com/