Notes

10 Meetups On Window Repair You Should Attend
Window Repairs

Window repairs can save homeowners money and make their homes comfortable. Window replacement is often required in the event of serious damage such as broken glass, or a broken window frame.

But many other issues can be fixed to prolong the lifespan of your windows. Common issues include:

Cracked or broken panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree's branch blown by strong winds, cracked window glass isn't just unattractive but can lead to higher electricity bills as the broken pieces let cold air to enter your home. Luckily, it's usually relatively easy to fix windows with damaged panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may have to employ a utility knife to remove any remaining putty or glazing compound that has accumulated around the edges of the frame. Next, use a soft cloth or paper towel to clean the surface of both the glass and the frame's wood.

Once the area is clean then apply a waterproof silicone caulking on the frame's perimeter. This helps prevent water from getting into the crack, which can cause further damage to the frame and the glass.

If you have double-pane glass a bad crack could compromise the gas layer that lies between the panes, making your windows less efficient in insulating. If the crack is significant enough to threaten the integrity of the glass, or the glass has an inner pane completely missing, it might be the time to call a professional.

Cracks caused by thermal stress can occur when there is a drastic difference in temperature between your home and the outside. The glass is then able to expand and shrink. If the cracks are on two sides of a window, it is recommended to replace it rather than attempt to repair it.

For windows that have cracked but aren't quite ready to be replaced clear tape can do a good job of stabilizing the crack and preventing bugs from entering cold air. You can cut a nylon stocking large enough to cover the entire crack and then glue it to the surface with duct tape. It's not a solution that will last forever however it's a great solution in the event of a crisis and keeps insects and cold air from entering your home. If your windows are old and you're beginning to see cracks in the glass, it's a good idea to check with your local window company regarding whether replacing the entire window would be the best option for you.

Rotten Wood

Wood rot is among the most frequent problems that plague windows. It can ruin the appearance of a home and can also be danger to your safety. It is possible to fix rotted wood. First, you need to make sure that the source of the rot has been dealt with. Look for leaks on the roof and other places where water could get into the wood.

You'll then have to take off the rotten parts of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After removing the rotten wood, you'll need replace it with new wood. It is recommended that you choose treated wood for this project as it is resistant to decay. If you are not able to replace the damaged timber, you can use wood hardener and filler to reinforce the damaged area. This type of product will be available at most hardware stores. Follow the directions on the label of the product to get the most effective results.

Once window repair have replaced the rotten areas of the windowsill, it is important to protect the repaired area. You can do this by applying a waterproof wood sealant. Sikkens, for example is a great one to use.

It is also possible to use an epoxy filler with two parts to shield the wood from further damage. It is easy to apply and leaves a nice finish. It is crucial to follow the directions on the label. After the epoxy filler dries, you can sand down the surface of the wooden. It is best to start with a rough layer of sandpaper, and then progress to a smoother one.

You do not want to expose the damaged area to more moisture. It is a good idea therefore, to cover the surface repaired with an oil-based prime which will shield it from moisture. After that, you can apply waterproof wood sealant.

Won't Open

There are many reasons why a window won't open. Wood frames can warp in wet weather, the house may have settled or someone may have nailed it shut for security reasons. With a little patience and the right tools you can unlock most stuck windows.

The accumulation of gunk or debris can be a major reason of a window not opening. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges and locks. Metal hardware can also rust when it comes into contact humidity and direct sunlight. Spraying grease on these areas to aid in preventing oxidation and help keep your windows operating well.

Stuck windows may be caused by an unintentional break or loosening of the pulleys that are used to raise and lower the window. These parts can be weakened and obstructed when they are placed higher than two floors above surface.

If you have difficulty opening a door, try using a pry-bar to gently open the window. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.


A broken spring could be the cause of windows that don't lift or lower. You will need to consult your owner's guide for more details depending on the person who made your windows.

If you've tried cleaning the moving parts of your windows and lubricating them but they still won't open, it might be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home go from functional to useless. If your windows aren't properly shut could leave your home vulnerable for water damage and burglary. Contact us to learn more about our replacement windows and services today!

Homepage: https://notes.io/wtmDh