Notes

Why You Should Focus On Enhancing Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism broken? Perhaps the door or window handles don't meet up properly or are hard to use.

It is essential that your double-glazed doors function smoothly, or else you will lose energy and increase the chance of burglary. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

It can be frustrating when a key snaps into a lock. It could also be a security risk in that it can leave you vulnerable to a burglar if the door does not lock. There are a couple of quick solutions you can use to resolve the issue and make your door functional again.

First, remember to stay calm. If you panic you may end up pushing the damaged key further into the lock.

Next spray WD-40 or another penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also use the screwdriver to break up any pieces stuck. If you have a chunk of the key that is still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. More Support work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that could serve to extract hooks and some Jigsaw blades can also be used for this function. If you don't have one of these tools, you can bend a hook using needle-nosed pliers. Finally, you can use a pair of tweezers grab and pull out the last bit of the broken keys.

If you can't get the broken piece of the key out, try using a lock de-icer. It's usually available at all hardware stores, and it works by freezing any moisture or ice that might be inside the lock.

If none of these methods seem to be helping, it might be time to call in a locksmith. The experts at Fitlocks can quickly resolve issues with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. You can request a double-glazing repair online or contact us to discuss your needs.

Broken Cylinder


A damaged cylinder poses an immediate security risk. It's fortunately a simple repair for an expert locksmith to complete. To fix the cylinder, locksmiths will need to tap it. They can do this using an hammer or another tools, but the most effective way is to make use of an extended match or piece of wire. Then, position the match's tip or wire near the keyway. The locksmith can then strike the lock in order to crack it. This is much safer than using a heavy hammer that could damage the lock.

The most frequent cause for cylinder head cracks is overheating. This can occur when the cylinder block and head are made from different metals, such as cast iron and aluminium. Different metals will heat up and cool down at different rates. This can cause localised hotspots to expand faster than the rest.

Another possible cause for cracks in the cylinder is corrosion. If the cylinder head and cylinder block are not properly maintained, it can result in corrosion or rust that could cause them to expand at a higher rate than they ought to. In time, this could cause cracks.

If your uPVC window or door lock is stiff or requires lots of pressure to turn, it can be the result of several things. This issue could be caused by a faulty locking mechanism or misalignment, and also a worn out handle.

Fortunately it's a simple and affordable fix for the majority of double glazing owners. A professional locksmith is able to solve this issue within an hour of arriving at the home. Depending on your needs they will be able to replace the locking mechanism, change the window handles, and also change the gearboxes. A locksmith with experience can always advise you on the most cost-effective solutions for your home. They can also suggest upgrades to high-security 3 Star euro cylinders TS007 that add an extra layer of protection against burglars. It is a small cost to get the peace of mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with time and use, so it's not a surprise they occasionally break. If yours is damaged it's difficult to determine the source of the issue and make sure you fix it correctly.

Whether the problem is with the internal locking mechanism or the latch, fixing your broken handle will improve your uPVC double glazing door's security and allow you stop the draughts. If you do not repair or replace your handle can be very expensive and can cause damage to the door's frame and lock, so it's worth taking some time to do it right.

Screwdriver When the window is open, loosen the screw holding the handle. The screw should be located on the inside of the backplate, which is usually hidden by a screw cap for aesthetic reasons. You should not lose any internal parts of the handle like the levers and plates on either side. Keep them in the same order to make it easier to replace if necessary.

Then, turn the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle with a second screwdriver. Once this is removed, you should be able to pull the handle away and pull out the broken spindle. Replace it with a new spindle, making sure it's the same length (you can buy them on the internet or in hardware stores). Securely screw it into the correct position. Be cautious not to overtighten as this could damage the handle or the window frame.

Close the handle and test it. The hope is that it will function smoothly and you'll be able to open your window once more.

Don't forget to double-check that your uPVC window is shut correctly when you're working with the handle. If they're not closing properly, you could experience draughts and damp in your home as and also affecting the efficiency of your home's energy usage. Core Sash Windows is a local window company that can adjust the hinges on the window frames to ensure that they close properly.

Broken Spindle

It is more common for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These types of windows require a handle that acts as a locking mechanism within the window frame. More Support is connected to a central rod which activates mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle is broken This can be a frustrating problem.

Fortunately, there are steps that can be taken to remedy this situation. A good locksmith can quickly and efficiently fix this problem. A reputable locksmith will be able to disassemble the handle of the window by using a tool to remove the wheel from the area that houses the spindle. This can be done with no damage to the handle or window frame.

After removing the wheel the technician will inspect the spindle and determine the cause of the break. This involves breaking the spindle into its individual parts and meticulously noting their general condition as well as any particular areas of damage or excessive wear. The process is carried out in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle, this assists in removing any debris or dirt that might be obstructing its normal operation. After that the spindle is cleaned, it can be repaired or replaced. If it's being replaced, the technician will need a dowel of a similar size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle is precisely matched to the handle.

If the spindle is damaged and cannot be repaired, it might require replacement. Home centers sell generic replacements however if your window design is unique you'll require contacting a cabinet maker or woodworker who can recreate the exact component. Once the new spindle is installed, it can be fitted to the handle by line up the screw holes on the handle with the frame's existing screws. Once the handle is in place, you can use your uPVC windows.

Homepage: https://0rz.tw/create?url=https%3A%2F%2Fwww.repairmywindowsanddoors.co.uk%2Ffinchley-windowrepair%2F