Notes

15 Reasons Not To Overlook Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism deteriorated? Maybe the handles on your uPVC windows or doors aren't aligned properly or are difficult to use.

You'll be wasting energy when your double-glazed doors do not work properly. This can also increase the risk of burglary. Owen the Locksmith can repair your door lock for an affordable cost.

Snapped Key

If a key breaks inside a lock, it could be extremely annoying. It can also be a security issue because it could leave you vulnerable to burglars if your door is not locked. Fortunately, there are simple fixes you can use to solve the problem and get your door operating properly once more.

Keep calm. If you panic and begin doing a lot of fumbling around you may end up pushing the broken piece of the key even further into the lock, thereby making the situation much worse.

Spray WD-40, or any other penetrating lubricant into the lock. This will allow the broken piece to emerge more easily. You can also use a screwdriver to help break up any stuck pieces that could be hindering the flow. If you're lucky enough to have a small piece of the key left visible it, you can make use of a paperclip or other metal object with a thin surface to grab it and then pull it out. Both methods work, but be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't happen to have one of these tools, you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grip and pull out the last piece of the key that was broken.

If you can't get the broken piece of key out, you can try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture present inside the lock.

If double glazing repair of these solutions work, it may be time to consult a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms so that they are simpler to operate. You can request repairs to your double-glazing online or call us to discuss your requirements.

Broken Cylinder

A broken cylinder can pose a major security risk. It's a good thing that it's a simple repair for an expert locksmith to complete. A locksmith must tap the cylinder to fix it. This can be accomplished with the hammer or other tool. The best method is to employ a wire or long match. Position the match or the wire's end close to the keyway. After this, the locksmith can strike the lock to crack it open. This is much safer than using a hammer, which could damage the lock.


The most frequent cause of cylinder head cracks is overheating. This can happen when the cylinder head and block are made from different metals, such as cast-iron or aluminium. Different metals will heat up and cool off at different rates. This can cause localised hotspots to expand faster than the rest.

Corrosion is a different cause of cracks in the cylinder. If the cylinder block and head are not maintained in a timely manner they could corrosion or rust and cause them to expand more than anticipated. This can cause cracks over time.

If your uPVC window or door lock is stiff or requires lots of pressure to turn, this can be the result of several things. This can be caused by a faulty locking mechanism, or misalignment and also a worn out handle.

Fortunately it is a simple and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith is able to solve the issue within one hour of arriving at the home. Depending on your needs they can change the locking mechanism, replace the window handles, or change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective solutions for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders, which provide an additional security layer from burglars. It's a small price to pay for the security that comes from knowing that your uPVC doors are secure.

Broken Handle

It's not surprising that window handle locks can break. They have complex mechanisms that become less effective over time. It isn't always easy to pinpoint the reason behind the broken window handle lock and repair it correctly.

Repairing your damaged handle, whether it's the internal latch or the locking mechanism will increase the security of your uPVC door and reduce the risk of draughts. It could be costly to repair or replace the handle in a way that isn't done correctly. It can also damage the frame and lock of your door.

Screwdriver When the window is open and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, which is usually hidden by an eye-catching cap to conceal it to enhance the appearance. Be sure to not lose any internal components within the handle, such as the plates or levers on either side of the spindle. Keep them in the same order so that it is easier to replace if necessary.

Then, with an additional screwdriver take the screw off that holds the handle to the spindle on the back. Once this is released, you'll be able to pull the handle off and pull off the damaged spindle. Replace it with a brand new spindle, ensuring it's the same length (you can find them online or in hardware stores). Screw it in place. Do not tighten the screw too much as this could damage the handle and the window frame.

Check that the new handle is correctly fitted Close the window and test the handle. It should work smoothly, and you will be able to open your windows once more.

Don't forget to double-check that your uPVC window is closing properly while you're working with the handle. If they aren't closing properly, you could experience damp or draughts inside your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges of the window frames to ensure that they close correctly.

Broken Spindle

It is quite common that the spindle inside a handle breaks rather than the handle itself. This is especially frequent in uPVC tilt and turn windows. These windows require a handle that acts as a locking device in the frame of the window. The handle is connected to a centre rod that is then activated by a series of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism does not open when the handle is turned it is possible that the spindle is broken, this can be a frustrating problem.

Fortunately there are steps that can be taken to fix this problem. A good locksmith can quickly and effectively address this issue. A good locksmith will be able disassemble the window's handle using a tool to take out the wheel portion where the spindle is located. This is done without damage to the handle or the window frame.

After removing the wheel, the technician can examine the spindle to determine the reason for its break. This involves disassembling the spindle and examining every component, observing any wear or damage. The process is done in a clean, well-lit room by highly skilled technicians.

Then, clean the damaged spindle. This will remove any debris or dirt that could be hindering it from functioning normally. The spindle can be replaced or repaired. If the technician is replacing the spindle, it is possible to use a dowel that is similar in size to the original. The technician will then drill matching holes into both pieces. This ensures that the new spindle is an exact fit with the handle.

If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centers offer generic replacements. However, If the style of your window is unusual then you will need to find a woodworker or cabinet maker who can make the exact model for you. Once the new spindle is in place it can be fitted to the handle by line up the screw holes on the handle with the frames existing screws. Once the new handle is in place, you'll be able to operate your uPVC window.

My Website: https://atavi.com/share/wetamtzmpycf