Notes

It's Enough! 15 Things About Double Glazing Lock Repairs We're Tired Of Hearing
Double Glazing Lock Repairs

Having quality locks on your windows and doors helps to prevent burglars from gaining access to your home. They usually don't want to break glass or attempt to squeeze through windows.

Certain double glazing owners however, have experienced problems with their door or window lock after installing. Luckily, these problems can be fixed without having to buy new double glazing.

Broken or Faulty Locks

If your uPVC window or door lock is damaged or broken, then a locksmith can fix it for you. They can fix the hinges, striker plates and locks on your double-glazed. They can also adjust the cylinder in order to fix any misalignment which could be causing your handle not to work properly.

The mechanism might be jammed if the key fits in the lock, but it does not turn or is difficult to insert. This can be due to dirt or grime getting stuck inside the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate it. It is important to use a dry lubricant, like graphite or teflon instead of oil which attracts dirt and stick to the interior of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant must work its way into the mechanism, and the lock should be able to turn effortlessly.

A malfunctioning lock could be caused by loose screws inside the mechanism of the lock. They can become loose and break off or fall out completely, preventing the lock from functioning properly. These screws can be tightened with a screwdriver, but you must be careful not to over tighten them. This could damage the internal components.

A faulty lock can be dangerous for both you and your family members, particularly if you have young children. It's possible for them to open the door without your knowledge, and this can allow them access to your home. If you are worried about this happening, then a vetted locksmith can provide rapid and effective service to re-secure your double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and damaged mechanisms on uPVC doors and windows. We can also alter your uPVC or double glazing locking system to meet your specific needs, which means that in most cases, replacement doors and windows are not necessary.

Handles that are damaged or faulty

As part of their overall security package, many double-glazed windows have a multipoint lock. This is a great option for those worried about criminals who are looking to gain access to your home. Ask your locksmith for antilift locks. They can be installed in addition to existing locks and will help keep your windows firmly closed.

It's not uncommon for the handle locks to become damaged or fail. They are the first part of your window to be forced open by criminals who want to break into. The good news is, this is one of easiest parts to repair.

Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot, again as an optional option on double-glazed windows.

When a handle is faulty it is essential to get the handle repaired as quickly as you can. The damaged handles could stop the window from closing properly and allow drafts to enter. It may also be a weak point that burglars who are opportunistic might exploit, putting your family and belongings at risk of theft.

To repair the damaged mechanism, first access the window frame, then take off the damaged handle. The gearbox that opens the handle is then accessed and the type identified so a replacement can be sourced which matches the profile of internal window frame mechanism.

Once the mechanism has been replaced the handle can then be re-attached with the original screws - but we would recommend replacing them with longer ones as this will give the most secure fit. The final step is to seal the handle with an opaque sealant. This will protect it from further deterioration. After this step is completed, your window should be fully functional again at a fraction the cost of replacing it.

Hinges that are broken or faulty

If your windows don't close correctly, draughts may enter your home, the security barriers will weaken and you run the risk of damp or water damage. Broken or faulty window hinges are a typical issue that can be fixed easily.

If your uPVC windows won't open or shut and close, it's likely the hinges need to be replaced or repaired. A lot of window manufacturers will require that you purchase an entirely new window unit in order to address this issue, but we can replace the hinges in order to save you money.

Window hinges are usually damaged by repeated use or weakened over time by corrosion. If you've got a broken window hinge, it is crucial to take the necessary precautions to avoid further damage. This means not causing the window to close or open.

Knowing the type of hinge you have will help you identify the right parts to repair it. The most common kinds of window hinges include Maco, Mila, Roto and other brands. Consult a professional to avoid buying parts that do not fit into your existing hardware. This could cause more damage.

A damaged hinge can be a big issue for your uPVC window and doors. They can be a significant source of noise, and they can also allow water infiltration that can cause damage to your windows.

To fix this issue, first verify that the pin barrel on both sides of the hinge is aligned. If it isn't, tap the head pin with the hammer to create a shallow bend in the barrel of the hinge. double glazing near me will help keep the pin in place. A friend can help you hold the doors as you remove hinge screws and hinges. Replace the hinges and install screws using glue. Finally, secure the hinges with clamps or weights while the glue dries.

Once your hinges are repaired after which you will be able to re-install the door and attach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw, so that they match up with each one.

Broken or damaged glass

uPVC Windows can become damaged over time, despite the fact that they are great at keeping cold out and retaining the heat. This can be the case with broken or damaged glass as well as defective locks. This is a problem that could be extremely costly when not addressed. It can also affect the aesthetics of your house and can lead to loss of insulation, which is why it's crucial to repair any damage as quickly as you can.


You can fix your cracked glass by yourself if you have the right tools and techniques. Make sure that the area surrounding the broken glass is free of debris so that any fragments don't cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in the proper way. Apply masking tape to the entire area. This will prevent glass fragments from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to gluing it in place is a good idea when you have windows with two panes. This will ensure that you have enough space to finish your project.

Use a dry, clean cloth to clean the glass's surface and the frame before applying the glue. Follow the curing and application instructions that differ from one product to the next. Depending on the degree of the crack you may need to clamp the glass while it is curing. You can do this using lightweight clamps that are designed to hold delicate materials.

Once the adhesive is fully set, carefully place the glass inside the window frame, making sure it's flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being reinstalled, as this can weaken the seal and cause condensation and water infiltration.

If you have a glass door that's completely shattered or has larger cracks, call an experienced professional glazier such as O'Brien(r) to arrange an exchange. It's crucial to act fast if you have broken glass.

Here's my website: http://www.sorumatix.com/user/congofold78