Notes

A Productive Rant About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case you'll need to source some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a number of problems that include sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles could also become loose. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. upvc window repairs

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it blows open with a breeze. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is an easy process but it can be easier with someone else to help hold the frame up.

Make sure that the uPVC hinges open and close in the right direction. This can be done by checking for the arrows on each hinge. This shows which way the window should open.

The problem can be caused either by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges can also become misaligned due to wear, causing a gap between the frame and sash. If they are beyond repair, it could be necessary to have them realigned. Second, the interlock can be disaligned. This happens on the hinge's side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the risk of draughts.


Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be positioned on the windowsill on top. They can keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert immediately.

Read More: https://www.repairmywindowsanddoors.co.uk/aylesbury-windowrepair/