Notes

Repairs To Upvc Windows Explained In Less Than 140 Characters
Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need to source some plastic spacers to help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. Get More is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is large, you might prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles could also loosen. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if wake up every morning to find a smoky wall and floors that are wet. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer can be put on. It is essential to keep in mind that when it is about uPVC window repair s, do not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to offer assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become unbalanced due to wear, causing a gap where the sash and frame meet. If they're beyond repair, it might be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it may be possible to give them a clean but in some cases it might be necessary to have them replaced.


The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it could be more cost-effective to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.

Read More: https://ctxt.io/2/AADQfH1QFA