Notes

Why We Do We Love Double Glazing Door Lock Repairs (And You Should Too!)
Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism not working properly? Perhaps the window or door handles aren't able to connect properly or are difficult to use.

You'll be wasting energy when your double-glazed doors do not function properly. This increases the chance of burglary. Owen the Locksmith will be able to repair your door lock for a reasonable cost.

Snapped Key

It can be frustrating when a key snaps inside a lock. It also poses a security risk since the door might not lock and leave you open to intrusion. Fortunately, there are simple fixes you can use to solve the problem and get your door functioning properly again.


Be calm. If you panic and begin playing around with your keys you could end up pushing the damaged piece of the key deeper into the lock, which could make the situation worse.

Spray WD-40 or another penetrating lubricant into the lock. This will help the broken piece come out more easily. You can also make use of a screwdriver to break up any stuck pieces that might be blocking the way. If you have a part of the key that is still sticking out, grab it with a paperclip or other thin metal object and pull it. Both methods work well, however, be careful not to push the damaged piece of the key even further into the keyway.

Some paperclips have grooved edges, which can serve as hook extractors and some Jigsaw blades also work for this function. If double glazing repairs near me don't have any of these handy, you can make use of needle-nose pliers to bend them and create a hook. Also, a pair tweezers can be used to grip and pull out the remaining bit of the broken key.

If you're unable to pull the broken piece of the key out, you can try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture present within the lock.

If none of these tricks appear to be working then it's probably time to call in a locksmith. Fitlocks experts can fix problems such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms so that they are easier to use. Book a double glazing repair via our website or give us a call to discuss your requirements.

Broken Cylinder

A broken cylinder is an extremely risky security issue. It's fortunately a simple repair for a professional locksmith to complete. To repair the cylinder, locksmiths must tap it. They can do this using the hammer or any other tool, but the most efficient way is to make use of a long match or a piece of wire. Position the match or the wire's end in the keyway. The locksmith will then strike the lock in order to crack it. This is superior to using a hammer that could cause damage to the lock.

The most common cause of cracks in the cylinder head is overheating. This can happen when the cylinder block and cylinder head are made of different metals, including cast iron and aluminum. When various metals heat up and cool down at different rates, it may cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in cylinders is corrosion. If the head and block of the cylinder are not maintained properly they may rust or corrode and cause them to expand faster than they would normally. This can cause cracks in the future.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn, it could be due to a variety of reasons. A faulty locking mechanism, misalignment or an old handle are the most common causes of this issue.

This is a simple and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith should be able to solve the issue within an hour after arriving at your residence. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes, based on the specific requirements of your home. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective solution for your home. They can also suggest upgrades to 3 Star security Euro cylinders, TS007, that will provide an extra layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.

Broken Handle

It's not a surprise that window handle locks could break. They have intricate mechanisms that become less effective over time. It isn't easy to determine the reason for a broken window handle lock and then fix it properly.

Fixing your broken handle, whether it's the internal latch or the locking mechanism will increase the security of your uPVC door and reduce the risk of draughts. It could be costly to repair or replace the handle in a way that isn't done correctly. It can also damage the frame and the lock of your door.

With the window in the open position and the window open, loosen the screw that secures the handle using a screwdriver. It should be located on the inside face of the back plate, normally covered by a screw cover for aesthetic reasons. It is important to not lose any internal parts of the handle like the levers and plates on either side. Ideally, keep these in the same order so you can re-install them if needed.

Then, using a second screwdriver take the screw off that holds the handle to the spindle on the back. Once the screw is loose, you can remove the handle and remove the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can purchase them online or in hardware stores). Securely screw it into the correct position. Be cautious not to overtighten because this could damage the handle or the window frame.

Make sure the new handle is installed, then close and test the handle. It should function smoothly, and you will be able to open your windows after a few times.

While you're working on the handle, don't forget to check your uPVC windows are closing properly. If they're not closing properly, you could experience draughts and damp in your home, as well as compromising your home's energy efficiency. Core Sash Windows is a local window company that can adjust the hinges on the window frames to ensure they close correctly.

Broken Spindle

It is often the case that the spindle within a handle breaks rather than the handle itself. This is most frequent in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the frame of the window. The handle is attached to a rod in the centre that triggers a set of mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism does not open after the handle has been turned, it is likely the spindle is damaged. This can be a problem that is frustrating.

Luckily, there are ways to fix this problem. A good locksmith can quickly and efficiently repair this issue. A professional locksmith will be able to disassemble the handle of the window by using a tool that removes the wheel portion that houses the spindle. This can be done with no damage to the handle or the window frame.

After removing the wheel, the technician can examine the spindle and identify the cause of the break. This involves breaking the spindle into its individual parts and carefully recording their general condition as well as any specific areas of wear or damage. This process is typically performed in a clean, well-lit room by skilled technicians.

The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that could be hindering its normal operation. After that the spindle could be repaired or replaced. If it is replaced, the technician can take the dowel that is similar in size to the one used in the first and drill mating holes in both pieces of the spindle. This ensures that the new spindle has a precise fit with the handle.

If the damaged spindle can't be repaired, it could need to be replaced entirely. Home centres sell generic replacements, but if the style of your window is unique then you will need to speak with a woodworker or cabinet maker who can make the exact component for you. Once the spindle has been installed, it can be connected to the handle. Line up the screw holes on the handle to the screws already in the frame. Once the new handle is seated you will be ready to operate your uPVC window.

Homepage: http://www.linkagogo.com/go/To?url=116613090