Notes

15 Surprising Stats About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

You will lose energy in the event that your double-glazed doors fail to function properly. This can also increase the likelihood of burglaries. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

It can be quite frustrating when a key is snapped inside a lock. It also poses a security risk, as the door may not lock and could leave you vulnerable to burglars. Fortunately, there are simple fixes you can try to resolve the problem and get your door operating properly once more.


First, remember to stay calm. If you panic and begin doing a lot of fumbling around you could end up pushing the broken piece of the key further into the lock, thereby making the situation even more difficult.

Spray WD-40, or any other penetrating oil, into the lock. This will assist the broken piece to be removed more easily. You can also use the screwdriver to break any pieces stuck. If you're lucky enough to have a small piece of the key visible it, you can make use of a paperclip, or any other metal object with a thin surface to grab it and then pull it out. Both of these methods work well, however, be very careful not to push the broken piece of the key even further into the keyway.

Some paperclips have grooved edges that could work in a pinch as a hook extractor, and some Jigsaw blades also work for this function. If you don't have any of them available, you can use needle-nose pliers to bend and create a hook. Finally, you can use a pair tweezers to grab and pull out the last bit of the broken keys.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture present within the lock.

If none of these tricks are working, it might be the time to contact locksmith. The experts at Fitlocks can quickly fix problems such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also alter your double glazing door mechanisms to make them easier to operate. Book a double glazing repair via our website, or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder is an immediate security risk. A professional locksmith can easily repair the cylinder. To fix the cylinder, locksmiths must tap it. They can do this using an hammer or another tools, but the most effective way is to use an extended match or piece of wire. Place the match or wire's end close to the keyway. The locksmith will hit the lock to break it open. This is much better than using a hammer that can cause damage to the lock.

The most frequent cause for cylinder head cracks is overheating. This can occur when the cylinder head and block are made from different metals such as cast-iron and aluminum. When continue reading this are heated and cool at different rates, it may cause localised hotspots that expand faster than the rest of the cylinder head, thus leading to cracks.

Another possible cause for cylinder cracks is corrosion. When the cylinder head and the cylinder block aren't maintained properly, this could result in corrosion or rust that could cause them to expand at a greater rates than they ought to. This could lead to cracks as time passes.

If your uPVC window or door lock is brittle and requires a lot more pressure to turn, it could be due to a variety of causes. This issue could be caused by a malfunctioning locking mechanism, or misalignment or a worn-out handle.

Fortunately, this is an easy and inexpensive fix for most homeowners with double glazing. A professional locksmith is able to fix this problem within one hour of arriving at your home. Depending on your needs they will be able to replace the locking mechanism, replace the window handles, or change the gearboxes. A professional locksmith will be able to provide you with a recommendation on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which provide an additional security layer from burglars. This is a small cost to pay for the security that comes with knowing your uPVC doors are secure.

Broken Handle

It's not a surprise that window handle locks may break. They are equipped with complex mechanisms that become less effective over time. If yours fails it may be difficult to pinpoint the cause of the problem and make sure that you repair it correctly.

Fixing your broken handle, regardless of whether it's the internal locking mechanism or latch will increase the security of your uPVC door and stop draughts. It could be costly to replace or repair your handle if it is not done correctly and can also damage the frame and the lock of your door.

double glazing repairs When the window is open remove the screw that holds the handle. The screw should be located on the inside of the backplate, usually concealed by the cap of the screw for aesthetic purposes. Be sure not to lose any of the internal components within the handle, like the plates or levers on either side of the spindle. It is best to keep them in the same order so you can replace them if needed.

Then, using another screwdriver take the screw off that connects the handle with the spindle at the back. Once this is released, you'll be able to pull the handle off and pull out the broken spindle. Replace it with a new one, making sure it is the same length as the old one (you will typically find them online or in hardware stores) and screw it securely into the right place. Be careful not to overtighten because this could damage the handle or the window frame.

Check that the new handle is correctly fitted, then close and test the handle. Hopefully, it will work smoothly and you'll be able to unlock your window.

Be sure to double-check that your uPVC window is closing properly while you're working with the handle. If they're not then you may experience damp and draughts inside your home, as and also affecting your home's energy efficiency. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is especially typical in uPVC tilt and turn windows. These kinds of windows require a handle that acts as a locking mechanism within the frame of the window. The handle is attached to a central rod that triggers the mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle has broken and this could be a frustrating problem.

Luckily, there are steps that can be taken to remedy this situation. A good locksmith can quickly and efficiently repair this issue. They will be able to take apart the window handle using a tool to remove the wheel portion of the mechanism that is where the spindle goes. This can be done without damage to the handle or the window frame.

After removing the wheel, the technician will inspect the spindle and identify the reason for its break. This involves disassembling the spindle and inspecting each component part, noting any damage or excessive wear. This process is usually carried out by technicians working in a clean and safe environment.

Next, clean the damaged spindle. This will remove any dirt or other debris that could be hindering it from operating normally. After this the spindle could be repaired or replaced. If it's being replaced, the technician could use an identical dowel size to the one used in the first and drill mating holes into both parts of the spindle. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle cannot be repaired, it could require replacement completely. Home centers sell generic replacements however if your window design is unique then you'll require contacting an expert in cabinet making or woodworking who can recreate the exact piece. Once the new spindle is in place it can be attached to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the handle is securely in place, you can use your uPVC windows.

Homepage: http://brewwiki.win/wiki/Post:How_To_Get_More_Results_Out_Of_Your_Double_Glazing_Seal_Repairs