Notes

Does Technology Make Double Glazing Door Lock Repairs Better Or Worse?
Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism not working properly? Perhaps the door or window handles aren't aligned properly or are difficult to use.

You'll lose energy if your double-glazed doors don't work properly. This also increases the risk of burglary. Owen the Locksmith will be able to repair your door lock at reasonable costs.

Snapped Key

It can be a hassle when a key is snapped into a lock. It's also potentially a security risk since the door may not lock and leave you open to intrusion. There are a couple of quick fixes you can make to fix the problem and make your door work again.

Be calm. If you get scared and start poking around wildly you may end up pushing the damaged piece of the key further into the lock, which could make the situation even more difficult.

Spray WD-40 or another penetrating lubricant into the lock. This will help the broken piece be removed more easily. You can also use a screwdriver to break off any pieces that are stuck. If you're fortunate enough to have a bit of the key hanging out and you want to remove it, make use of a paperclip, or any other thin metal object to grab it and remove it. Both of these methods work well, but be cautious not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't happen to have one of these tools, you can bend a hook with needle-nosed pliers. Additionally, you can make use of a pair of tweezers to grab and pull out the last bit of the broken keys.

If double glazing repairs are unable remove the broken key piece then you can use a lock deicer. It is available in most hardware stores and is used to freeze any moisture that may be present in the lock.

If none of these strategies appear to be working, it might be time to call in locksmith. The experts at Fitlocks can quickly solve problems like broken handles or broken keys with uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms so that they are easier to use. Get a double glazing repair through us online or give us a call to discuss your needs.

Broken Cylinder

A broken cylinder can be an extremely risky security issue. A professional locksmith can easily fix the cylinder. A locksmith must tap the cylinder in order to fix it. They can do this using the hammer or any other tool, but the most efficient way is to use a long match or piece of wire. Then, position the match's tip or wire near the keyway. The locksmith can then strike the lock to break it. This is much better than using a hammer, which could cause damage to the lock.

The most frequent cause of cracks in the head of a cylinder is due to overheating. This can occur when the cylinder block and head are made from different metals, including cast iron and aluminum. When different metals are heated and cool at different rates, it could cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.

Another reason that could cause cracks in cylinders is corrosion. If the head and block of the cylinder are not maintained in a timely manner they may be corroded or rust, which can cause them to expand more than expected. In time, this could cause cracks.

If your uPVC window lock or door is brittle or requires a lot of pressure to turn, it can be the result of several things. A malfunctioning locking mechanism, misalignment or the wear of the handle are typical causes of this problem.

Fortunately it's a simple and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith will usually be able to solve this problem within an hour of arriving at your home. They can repair the locking mechanisms, or replace the window handles and change the gearboxes based on the specific requirements of your home. A locksmith with experience will always be able advise you on the most cost-effective options for your home. They can also suggest upgrades to 3 Star security euro cylinders TS007 that give you an additional layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.

Broken Handle

Window handle locks are complex mechanisms that wear out as time passes and usage, so it's no surprise that they sometimes break. It isn't always easy to pinpoint the cause of a broken window handle lock and fix it correctly.

The issue could be in the internal locking mechanism or the latch, fixing your broken handle will increase your uPVC double glazing door's security as well as help you to stop the draughts. It is costly to repair or replace your handle if it is not done correctly and can also harm the frame and the lock of your door.


Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the backplate, usually covered by the cap of the screw for aesthetic reasons. Be sure to not lose any internal components inside the handle, such as the plates or levers on the opposite side of the spindle. Keep them in the same arrangement so that it is easier to replace if necessary.

Then, with a second screwdriver, loosen the screw that connects the handle with the spindle in the back. Once the screw is loose, you should be capable of pulling the handle away and pull out the broken spindle. Replace it with a brand new one, making sure that it's the same size as the old one (you will typically find them on the internet or in hardware stores) and securely screw it in the right place. Be careful not to overtighten as this could cause damage to the handle or the window frame.

Make sure the new handle is correctly installed, then close and test the handle. It should operate smoothly and you'll be able to open your windows once again.

While you're working on the handle, be sure to ensure that your uPVC windows are shut correctly. If they don't then you may experience draughts and damp in your home, as well as compromising the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is quite common that the spindle in the handle is broken, not the handle itself. This is particularly typical in uPVC tilt and turn windows. These windows require a handle that operates a locking device in the frame of the window. The handle is attached to a central rod that triggers the cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism does not open when the handle is turned, it's likely the spindle has been damaged. This can be a frustrating problem.

There are ways to fix this issue. A professional locksmith will be able to quickly and effectively address this problem. A professional locksmith will be able disassemble the window's handle using a tool to take out the wheel from the area in which the spindle is. This can be done with no damage to the handle or window frame.

After the wheel has been removed, the technician will inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as in addition to any specific areas of wear or damage. This process is typically carried out in a clean, well-lit room by skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that might be hindering its normal function. Following this the spindle can be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is the same size to the original. He will then make holes in the same way into both pieces. This will ensure that the spindle fits perfectly with the handle.

If the spindle is damaged and cannot be repaired, it could need to be replaced entirely. Home centres sell generic replacements, but if the design of your window is unusual then it will be necessary to speak with a woodworker or cabinet maker who can replicate the exact model for you. Once the new spindle is in place it can be positioned to the handle by line up the screw holes in the handle and the frame existing screws. Once the new handle is in place, you'll be able to operate your uPVC window.

Homepage: https://okniga.org/user/seatdime23/