Notes

10 Things We All Hate About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. However, if you have double pane windows that are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. In time, they could be affected by a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need open the window to get to the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you can't reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close your window and do a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking may need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will make your window harder to clean and decrease its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease, it may be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to replace a hinge on a window however it is easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.


The problem with the hinges on windows could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. window repair near me can be caused by different things. The hinges can also be misaligned due to wear, which can cause a gap where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. Second, the interlock can also become misaligned. This happens on the hinge's side and may need to be cleaned. In certain instances it is possible to replace the hinges.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be placed on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. If you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.

Website: https://cutt.ly/cwFdCEaW