Notes

17 Reasons Why You Shouldn't Be Ignoring Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your home until a professional arrives to repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has a window. This will give you the best of both.

2. Sagging


uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. It's important to take action when you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close your window and do an initial test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs , do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes have no debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease It could be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. Changing click through the next article is an easy procedure, but it is simpler with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused by opening the window incorrectly or by a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, creating an opening between the frame and sash. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. Second, the interlock can also become disaligned. This happens on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric filled with some type of filler. They can be placed on the windowsill on top. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and they may reach a point where it is more cost-effective to replace them rather than fix them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.

Read More: https://dahl-pallesen-2.blogbright.net/15-surprising-stats-about-window-repairman