Notes

20 Tips To Help You Be More Efficient At Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism faulty? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

It is crucial that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

If a key is snapped off within a lock, it could be extremely difficult. It can also be a security issue, as it may leave you vulnerable to a burglar if the door is not locked. Fortunately, there are quick fixes you can attempt to fix the problem and get your door functioning properly again.

Remember to remain calm. If you panic you could end up pushing the broken key further into the lock.

Next spray WD-40 or another penetrating oil into the lock to help the broken piece slide out more easily. You can also use a screwdriver to break any pieces stuck. If you have a piece of the key that is stuck then grab it using the help of a paperclip or any other thin metal object and pull it. double glazing near me work, but you must be careful not to push the broken key further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these available, you can use needle-nose pliers to bend and create a hook. Additionally, you can use a pair of tweezers grab and remove the remaining pieces of broken keys.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It's usually found in most hardware stores, and it works by freezing any moisture or ice that might be in the lock.

If none of these tricks appear to be working then it's probably time to call a locksmith. Fitlocks experts can quickly solve problems like broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. You can book a double-glazing repair online or call us to discuss your requirements.

Broken Cylinder

A broken cylinder can be a major security risk. Luckily, it's an easy repair for an expert locksmith to complete. To fix the cylinder locksmiths will need to tap it. They can do this with a hammer or other tools, but the most effective method is to make use of an extended match or piece of wire. Then, place the match's end or wire near the keyway. The locksmith can then hit the lock to break it. This is much better than using a hammer that could harm the lock.

The most frequent cause for cylinder head cracks is overheating. This can happen when the cylinder head and block are made of different metals, such as cast-iron or aluminium. When different metals heat up and cool down at different rates, it could create hotspots in the local area that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion is a different reason for cylinder fractures. If the cylinder head as well as cylinder block are not properly maintained, this can lead to rusting or corrosion that could cause them to expand at a higher rate than they ought to. As time passes, this may also lead to cracks.

If your uPVC window or door lock is brittle and requires more pressure to turn it could be due to a variety of reasons. This problem can be caused by a faulty locking mechanism, or misalignment or a worn-out handle.


This is a simple and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith should be able to resolve this issue within a matter of hours after arriving at your residence. Based on your requirements they can change the locking mechanism, replace the window handles, and change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders which give you an extra layer of protection against burglars. This is a small price to pay for the peace of mind that comes with knowing your uPVC doors are secure.

Broken Handle

Window handle locks are complex mechanisms that become less effective with time and use, so it's no surprise that they can break. It isn't easy to determine the reason for the broken window handle lock and repair it correctly.

Repairing your damaged handle, whether it's an internal locking mechanism or latch will increase the security of your uPVC door and reduce the risk of draughts. When you aren't doing it right, replacing or repairing your handle can be very expensive and could damage the door's frame and lock, so it's worth taking some time to make sure you do it right.

Screwdriver Open the window and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, usually covered by an eye-catching cap to conceal it for aesthetic purposes. Be sure to not lose any of the internal components inside the handle, like the plates or levers on either side of the spindle. Ideally, keep them in the same order so you can re-install them when needed.

Then, turn the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that fixes it to the internal spindle using another screwdriver. Once the screw is loose, remove the handle and take the broken spindle out. Replace it with a brand new one, ensuring it's the same length as the previous one (you can usually find these on the internet or at hardware stores) and screw it securely into the correct position. Be careful not to overtighten as this could damage the handle or the window frame.

Close the handle and try it. It should operate smoothly, and you will be able to open your window once more.

Make sure to check that your uPVC window is closing properly when you're working with the handle. If they don't cause damp and draughts inside your home as well as compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they shut correctly.

Broken Spindle

It is more likely for the spindle to break rather than the handle. This is most common in uPVC tilt and turn windows. These windows require a handle that acts as a locking device in the frame of the window. The handle is attached to a central rod which is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism is not able to open when the handle is turned it is possible that the spindle is broken, this can be an extremely frustrating issue.

There are solutions to this issue. A reputable locksmith can quickly and effectively fix this problem. They will be able to disassemble the window handle by using a tool that removes the wheel part of the mechanism where the spindle goes. This can be done with no damage to the handle or the window frame.

Once the wheel has been removed the technician can then inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its component components and carefully observing their general condition, as in addition to any specific areas of wear or damage. This procedure is typically carried out by technicians working in an environment that is clean.

The next step is to clean the damaged spindle. This will help remove any dirt or other debris that might be preventing it from operating normally. After that the spindle could be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is similar in size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle is beyond repair, it may be necessary to replace it completely. Home centers sell generic replacements, but if your window design is unique, you will need to contact a cabinet maker or woodworker who can make the exact piece. Once the spindle has been installed, it can be fixed to the handle. The screw holes on the handle with the screws already in the frame. Once the new handle is firmly installed, you are now ready to operate your uPVC window.

Homepage: https://sociable-frog-gs6mvp.mystrikingly.com/blog/seven-explanations-on-why-glazing-repair-is-so-important