Notes

9 Signs That You're An Expert Double Glazing Door Lock Repairs Expert
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism become faulty? Perhaps the door or window handles aren't aligned correctly or are difficult to use.

You'll lose energy if your double-glazed doors don't perform as they should. This also increases the chance of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

If a key is snapped off in a lock, it could be extremely difficult. It could also be a security risk because it could leave you vulnerable to burglars if your door does not lock. There are a few easy fixes you can try to fix the problem and get your door working again.

Keep calm. If you panic and start playing around with your keys, you might just end up pushing the damaged piece of the key deeper into the lock, making the situation much worse.

Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece to come out more easily. You can also employ a screwdriver in order to break up any pieces stuck that could be hindering the flow. If you happen to have a little bit of the key left visible and you want to remove it, make use of a paperclip, or any other thin metal object to grab it and remove it. Both methods work, but you must be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as a hook extractor and some Jigsaw blades can also be used for this purpose. If you don't have any of them handy, you can use needle-nose pliers to bend them and create hooks. Also, a pair tweezers is a good way to grip and remove the remaining part of the broken key.

If you are unable remove the broken piece of key Use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present within the lock.

If none of these solutions work, it might be time to contact a locksmith. Fitlocks experts can quickly fix problems such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to allow them to operate more easily. You can request a double-glazing repair online or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose an extremely risky security issue. Luckily, it's an easy repair for an expert locksmith to complete. Locksmiths will need to tap the cylinder in order to fix it. This can be done using a hammer, or any other tool. The best method is to use a wire or a long match. The match or wire end near the keyway. The locksmith will strike the lock and break it open. This is more secure than using the hammer, which could harm the lock.

Overheating is the most common reason for cylinder heads to crack. This can happen when the block and cylinder head are made from different metals such as cast-iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.

Another possible cause for cracks in cylinders is corrosion. If the head and block of a cylinder are not maintained correctly they could be corroded or rust and cause them to expand more than anticipated. This could lead to cracks over time.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn, it could be due to a variety reasons. This issue could result from a defective locking mechanism, or misalignment as well as a worn-out handle.

This is a simple and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith will usually be able to solve this issue within a matter of hours after arriving at your residence. They can replace the locking mechanisms, or change the window handles, and also change the gearboxes, depending on the specific requirements of your home. A locksmith with experience will always be able advise you on the most cost-effective options for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which provide an additional security layer from burglars. It's a small price to get the peace of mind that comes from knowing that your uPVC door is secure.

repairmywindowsanddoors 's not surprising that window handle locks could break. They are equipped with complex mechanisms which deteriorate over time. It isn't easy to determine the reason for a broken window handle lock and repair it correctly.

The issue could be related to the locking mechanism inside or the latch, fixing your broken handle can improve your uPVC double glazing door's security and help you stop draughts. It could be costly to repair or replace your handle incorrectly and it can also damage the frame and lock of your door.

With the window in the open position then loosen the screw that secures the handle using the screwdriver. The screw should be located on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it to enhance the appearance. Be sure to not damage any of the internal parts within the handle, for example the plates or levers on either side of the spindle. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, using a second screwdriver take the screw off that holds the handle to the spindle at the back. Once the screw is loose, you should be able to pull the handle off and pull out the broken spindle. Replace it with a new spindle, making sure it's the same length (you can purchase them online or at hardware stores). Screw it in the correct position. Do not overtighten the screw as this could harm the handle as well as the window frame.

Close the handle and test it. It is likely that it will operate smoothly and you'll be able to open your window once more.

Make sure to check that your uPVC window is shut properly when you're using the handle. If they don't cause damp and draughts in your home as well as compromising the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they can shut properly.

Broken Spindle

It is quite common that the spindle in the handle is broken, not the handle itself. This is particularly typical in uPVC tilt and turn windows. These types of windows require a handle which is a lock mechanism that is located in the frame of the window. The handle is connected to a central rod that activates a series of locks that are shaped like mushrooms and secure the window frame keep. If the dead latch mechanism is not able to open when the handle has been turned, it is likely the spindle is broken. This can be a frustrating issue.

Fortunately, there are steps that can be taken to fix this problem. A reputable locksmith will be able to quickly and effectively address this problem. A reputable locksmith will be able disassemble the window's handle using a tool to take out the wheel from the area where the spindle is located. This can be done without damage to the handle or window frame.

Once the wheel is removed, the technician can inspect the spindle to determine what caused it to break. This involves breaking down the spindle into its individual parts and meticulously noting their general condition as well as any specific areas of damage or excessive wear. The process is carried out in a clean, well-lit room by skilled technicians.

The next step is to clean the damaged spindle, this helps eliminate any debris or dirt that might be hindering its normal functioning. After this the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. He will then drill matching holes into both pieces. This will ensure that the new spindle is precisely matched to the handle.


If the damaged spindle cannot be repaired it may need to be replaced entirely. Home centers offer generic replacements. However, if the design of your window is unusual then it is necessary to find a woodworker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle with the frame's existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.

Website: https://www.repairmywindowsanddoors.co.uk/streatham-windowrepair/