Notes

Watch Out: How Window Repair Is Taking Over And What To Do About It
Window Repairs

Window repairs can help homeowners save money and make their homes comfortable. In the event of major damages such as broken glass or a cracked frame, a window replacement could be required.

However, many other issues can be addressed to extend the life of your windows. Some common issues include:

Broken or cracked panes

Cracked windows can be caused by a lawnmower that throws errant rocks or by a tree branch being blown by strong winds. It's not just visually bad, but it can result in higher energy bills because the broken pieces allow cold air into your home. Luckily, it's usually relatively simple to repair windows with cracked panes.

Begin by carefully removing the glass using gloves and glasses. You may have to use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the wood of the frame using a soft cloth or paper towel.

After the area is cleaned and dry, apply a waterproof silicone caulking on the perimeter of the frame. This will stop water from getting into the frame through the crack and result in further damage.

A serious crack in double-paned glass may cause gas to leak between the panes, rendering your windows less insulative. If the crack is severe enough that it compromises the strength of the window or the pane inside is not there it is possible to call an expert.

Thermal stress cracks may also occur when there's an extreme temperature difference both inside and outside your home. The glass is then able to expand and shrink. If this happens across two parts of a window it's recommended to simply replace the pane instead of attempting to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can also cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. This isn't a permanent solution however it's a great solution in a pinch and it keeps cold air and insects from entering your home. If you notice cracks or blemishes on your windows that are older You should consult the local company to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is a common problem for windows. It can damage a home's appearance and pose a safety danger. It is possible to repair rotted wood. It is first necessary to address the cause of the wood's rot. Look for leaks on the roof and other areas where water can enter the wood.

You'll then have to take off the rotten parts of the window frame. This can be done using either a chisel, a rasp or claw hammer. After removing the decayed wood, you'll need to replace it with fresh wood. Pre-treated wood is suggested for this project, as it will resist decay. If you are unable replace the wood damaged by rot, you can try using filler or wood hardener to help strengthen the damaged area. This type of product will be available at a majority of hardware stores. To get the best results, make sure you follow the directions on the label.

After you have replaced the decayed areas of the windowsill, it's essential to protect the newly-repaired area. This can be done by applying an water-resistant wood sealant. Sikkens for instance, is a great product to apply.


Make use of a two-part epoxy to protect the wood against further damage. It is simple to apply and gives an excellent finish. However, it is very important to adhere to the instructions for application on the label. After the epoxy filler has dried, you can sand the surface of the wood. Start with a rough sandpaper, then move on to a smoother grade.

The last thing you want to do is to make the area that has been damaged by exposed to more water. It is therefore an ideal idea to cover the repaired area with an oil-based primer which will protect it from moisture. After that, you are able to reapply the wood sealant, which is waterproof.

The W won't open

There are many reasons windows don't open. Wood frames can warp when exposed to rainy weather, or the house could have settled or someone may have nailed it shut to protect themselves. With a bit of patience and the right tools you can open most stuck windows.

The accumulation of gunk or debris could be the main cause of a window not opening. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges, and locks. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can prevent oxidation and keep your window functioning correctly.

Stuck windows could also be the result of an unintentional break or loosening of the pulleys used to raise and lower the window. These components can lose their tension and get blocked particularly when the window is situated at least two stories above the ground.

If his response have difficulty opening a door, you can use a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. You can also try running a hair dryer across the edges of the frame for a few minutes to warm the wood and help it to move more easily.

A damaged spring can be the cause of a window that won't lift or lower. Depending on who manufactured the windows, you'll need to refer to the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they aren't opening, it's probably time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home go from being functional to unusable. If a window isn't properly shut could expose your home to burglary and water damages. Contact us today to learn more about our replacement windows as well as our services!

Website: https://opencbc.com/home.php?mod=space&uid=1712847