Notes

20 Things You Must Be Educated About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism faulty? Perhaps the handles on your uPVC windows or doors aren't aligned correctly or are difficult to use.

You will lose energy in the event that your double-glazed doors fail to work properly. This increases the likelihood of burglaries. Owen the Locksmith can repair your door lock at a reasonable price.

Snapped Key

When a key snaps off in a lock, it could be extremely annoying. It could also be a security issue because it could leave you vulnerable to an intruder if the door is not locked. There are a couple of quick fixes you can make to fix the problem and make your door functional again.

Keep calm. If you panic you may end up pushing the broken key further into the lock.

Spray WD-40 or another penetrating lubricant, into the lock. This will allow the broken piece emerge more easily. You can also use a screwdriver to help break up any pieces stuck that could be hindering the flow. If you happen to have a small piece of the key left sticking out it, you can make use of a paperclip or other metal object that is thin to grab it and remove it. Both methods work well, however, be careful not to push the damaged piece of the key even further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't happen to have any of these you can bend a hook using needle-nosed pliers. Additionally, you can make use of a pair of tweezers to grab and pull out the last piece of broken keys.

If you are unable to remove the broken piece of key, use a lock deicer. It's available in many hardware stores and works by freezing any moisture that may be present within the lock.

If none of these solutions seem to work, it may be time to consult a locksmith. Fitlocks experts can quickly resolve issues with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also alter the double glazing door mechanisms to ensure that they are more easy to use. You can request repairs to your double-glazing online or call us to discuss your needs.

Broken Cylinder

A broken cylinder can be a serious security risk. It's fortunately a simple repair for an expert locksmith to complete. To fix the cylinder locksmiths will need to tap it. They can do this with the hammer or any other tools, but the most effective method is to make use of a long match or piece of wire. Then, put the match's tip or wire close to the keyway. The locksmith will then strike the lock to crack it. This is superior to using a hammer that could harm the lock.

The most frequent cause for cylinder head cracks is overheating. This can occur when the cylinder block and head are made from different metals, including cast iron and aluminum. Different metals can be heated and cool at different rates. This can cause localised hotspots to expand faster than the rest of the cylinder.

repairmywindowsanddoors.co.uk is a different cause of cracks in the cylinder. If the head and block of a cylinder are not maintained in a timely manner, they can rust or corrode and cause them to expand faster than anticipated. In time, this could cause cracks.

If your uPVC window or door lock is stiff or requires a lot of pressure to turn, this can be caused by a number of things. This can be caused by a faulty locking mechanism or misalignment as well as a worn-out handle.

Fortunately, this is an easy and cost-effective fix for the majority of double glazing owners. A professional locksmith will usually be able to resolve this problem within an hour of arriving at your property. They can repair the locking mechanisms, or replace the window handles and change the gearboxes, depending on your specific needs. A professional locksmith will always be able to advise you on the most cost-effective options for your home. They can even recommend upgrades to 3 Star security Euro cylinders, TS007, that will give you an additional layer of protection against burglars. It's a small price to enjoy the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks could break. They have complex mechanisms that wear out over time. It can be difficult to determine the reason behind a broken window handle lock and repair it correctly.


Fixing the broken handle, whether it's an internal locking mechanism or latch, will improve the security of your uPVC door and reduce the risk of draughts. It could be costly to repair or replace your handle incorrectly and it can also damage the frame and the lock of your door.

With the window open then loosen the screw that holds the handle using the screwdriver. It should be located on the inside face of the back plate, normally covered by an aesthetically pleasing cover for the screw reasons. Be sure to not damage any of the internal components within the handle, for example the levers or plates on the opposite side of the spindle. Keep them in the same order to make it simpler to replace them in the event of a need.

Then, turn the handle to make it 90 degrees to the window frame and loosen the screw at the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is loose, take the handle off and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can purchase them online or at hardware stores). Screw it into the correct position. Do not tighten the screw too much because this could cause damage to the handle and window frame.

Make sure the new handle is correctly fitted, then close and test the handle. Hopefully, it will work smoothly and you'll be able to open your window once more.

Don't forget to double-check that your uPVC window is shut properly when you're using the handle. If they're not closing properly cause draughts and damp in your home as well as compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure that they close properly.

Broken Spindle

It is usually the case that the spindle within the handle is broken, not the handle itself. This is most common in uPVC tilt and turn windows. These windows require a handle which acts as a locking mechanism within the window frame. The handle is attached to a central rod which in turn activates mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism is not able to open after the handle is turned, it is likely the spindle has been damaged. This could be a frustrating problem.

Luckily, there are steps that can be taken to rectify this issue. A good locksmith can quickly and efficiently fix this problem. A reputable locksmith can disassemble the handle of the window by using a tool that removes the wheel from the area where the spindle is located. This is done without damage to the handle or the window frame.

After removing the wheel the technician can examine the spindle and determine the cause of the break. This involves breaking down the spindle into its constituent parts and carefully recording their general condition as in addition to any specific areas of wear or damage. The process is done in a clean environment by skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that might be obstructing its normal functioning. After that the spindle is cleaned, it could be repaired or replaced. If it's being replaced, the technician could use an identical dowel size to the one used in the first and drill mating holes into both parts of the spindle. This will ensure that the new spindle is an exact fit with the handle.

If the damaged spindle cannot be repaired, it might require replacement. Home centers offer generic replacements but If the style of your window is unusual then it is necessary to find a woodworker or cabinet maker who can make the exact model for you. Once the new spindle is in place it can be attached to the handle by lining up the holes for screws in the handle with the frame's existing screws. Once the handle is securely seated, you can operate your uPVC windows.

Website: https://www.repairmywindowsanddoors.co.uk/swanley-windowrepair/