Notes

10 Facts About Double Glazing Lock Repairs That Can Instantly Put You In A Good Mood
Double Glazing Lock Repairs

Having quality locks on your doors and windows will stop burglars from gaining access to your home. They generally don't like breaking glass or squeezing through windows that are not closed.

Certain double glazing owners however, have experienced problems with their door or window lock following the installation. Fortunately, these issues can be fixed without having to buy new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window or door lock if it is damaged or is not working properly. They will be able to repair the striker plates, hinges and locks on your double glazing. They can also adjust the cylinder in order to correct any misalignment that may be causing your handle to function properly.

If the key fits inside the lock but doesn't turn or is difficult to insert the mechanism might be seized up. This can be due to grime or dirt getting stuck within the mechanism. If this is the case, then it is possible to clean the lock and lubricate it. Make use of a dry lubricant, such as graphite or teflon but not oil as oil attracts dirt and cause it to stick to the mechanism's inside. After you have lubricated the lock, you must insert the key and then try to turn it. The lubricant must be absorbed into the mechanism and the lock should be able to turn easily.

The loose screws inside the lock mechanism are another reason for a malfunctioning lock. They can loosen and fall out or break completely, preventing the lock from working correctly. A screwdriver is a tool to tighten these screws but care must be taken not to tighten them too much because this could cause damage to the internal components.

A faulty lock is dangerous for you and your family. This is particularly relevant if you have young children. They could easily open the door without knowing and gain access to your house. If you're worried about this happening, a vetted locksmith can provide a quick and efficient service to secure your double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and damaged mechanisms on uPVC doors and windows. We can also alter your uPVC or double glazing locking system to meet your specific requirements, which means that in many cases replacement doors and windows are not required.

try these guys out that are damaged or are damaged

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great option for those worried about criminals who are looking to gain entry to your home. It's also worth asking your installer about anti-lift locks that can be installed on top of the locks that are already in place to help keep your window firmly locked in a closed position.

It's not uncommon for handles to be damaged or fail. They are the first part of your window to be pushed open by criminals who want to break into. The good news is that this is one of easiest parts to fix.

Modern uPVC handles as well as aluminium handles are equipped with the multi-point locking mechanism referred to as Espagnolette which is designed to prevent forced entry. This security upgrade is available as an option with new uPVC windows. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot and again as an additional feature on all new double-glazed window installations.

If a handle is damaged, it's important to get this repaired as soon as is possible. Faulty handles may prevent the window from closing properly and allow a draft to enter. It could also be a vulnerability that thieves can exploit, putting your family's belongings and you at risk.


The process of repairing the damaged mechanism begins with gaining access to the window frame and then removing the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be found that is in line with the profile of the internal window frame mechanisms.

After the mechanism has been replaced the handle can be put back together using the original screws. However, we suggest replacing them with longer screws since they provide an even more secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further corrosion. After that your window will be operational again and at a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not shut properly, you could suffer from draughts or an affliction of your home's security barrier and a higher chance of damp or water damage. Window hinges that fail or fail are a common occurrence and can be fixed easily.

If you have a uPVC windows that won't open or close and close, it's likely that your hinges are damaged or broken and require replacement. Many window companies will require that you purchase an entirely new window unit in order to resolve this issue, but we are able to replace the hinges in order to save you money.

Window hinges may break from repeated use or they might be damaged through rust over time. If you find a broken hinge, it's important to take precautions to avoid further damage by being careful not to make the window swing to close or open.

You can find the right parts for your hinge by identifying its type. The most common types of window hinges are Maco, Mila, Roto and many other brands. It's best to consult a professional in this case to ensure that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and cause further damage.

Faulty hinges are a major issue for uPVC doors and windows. They can be an important source of noise, and they could also allow water to get into your windows.

To resolve this issue, first make sure that the pin barrel on both hinge halves is aligned. If it isn't then tap the headpin using a hammer in order to create a slight bend in the hinge barrel. This will hold the pin in position. Then, ask a helper to hold the door as you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges using those that are the same size and then attach the screws using glue. Finally fix the hinges using weights or clamps while the glue is drying.

Once you have repaired the hinges, you can reinstall the door. You can also attach the handle. Replace the screws with wooden dowels that are the same length as the original screw to ensure that they match.

Broken or Faulty Glass

uPVC Windows can become damaged in time, despite the fact they are extremely effective in keeping cold out and conserving warmth. This could include broken or damaged glass, as well as damaged locks. If neglected, this could turn into a major expense. It can also affect the aesthetics of your home and can lead to loss of insulation, so it's crucial to repair any damage as quickly as possible.

You can repair the crack in your glass by yourself if you have the proper tools and techniques. First, make sure that the area around the glass is clear so that any shards don't injure anyone and aren't an accident-prone area. After that, take away any broken glass pieces and dispose of them in a proper manner. Apply masking tape over the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-pane glass it's a good idea prepare the glass before glueing it back in place so that you know you'll have enough room to complete the project.

Before applying the glue, clean the surface of the damaged frame and the glass with an unclean, dry cloth. Follow the directions for application and curing that can differ from product to. Depending on the angle of the crack, you may need to hold the glass to hold it in place during the curing process with lightweight clamps that are specifically designed to support fragile materials.

After the adhesive has completely cured, carefully install the glass in the window frame. Make sure it is flush with the frame edge and that there aren't any gaps between the glass sash as well as the frame. Avoid flexing the glass as you install it again, as this could weaken the seal. This could lead to water infiltration or condensation.

Contact a professional glazier, like O'Brien(r) for an appointment to replace your glass if the window is completely broken. It's important to act quickly if you have broken glass.

Here's my website: https://cutt.ly/WwFTo0HB