Notes

15 Pinterest Boards That Are The Best Of All Time About Double Glazing Lock Repairs
Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows will stop burglars from accessing your home. In general, they don't enjoy breaking glass or trying to wiggle through open windows.

Certain double glazing owners however, have experienced problems with their window or door lock after the installation. These problems can often be resolved without the need to replace double glazing.

Broken or damaged locks

A locksmith can repair your uPVC window lock or door lock if it is damaged or broken. They will be able to fix the hinges, striker plates and locks on your double glazing. They can also adjust the cylinder in order to fix any misalignment that could cause your handle to work properly.

The mechanism might be jammed if the key fits in the lock, but it does not turn or be difficult to insert. This can be due to dirt or grime accumulating inside the mechanism. If this is the case, it may be possible to clean the lock and lubricate it. Use a dry lubricant like graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside mechanism. After lubricating the lock, you must insert the key and try to turn it. The lubricant must work its way into the mechanism, and the lock should spin effortlessly.

The loose screws inside the lock mechanism are another reason for a malfunctioning lock. They can become loose and fall out or break off completely and stop the lock from functioning properly. These screws can be tightened using a screwdriver, but be cautious not to tighten them too much. This can damage the internal components.

A broken lock can be hazardous for you and your family. This is especially relevant if you have young children. It can be easy for them to unlock the door without you knowing, and this can give them access to your home. If you're concerned that this could happen, a vetted professional locksmith can assist you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and damaged mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always necessary.

Handles that are damaged or broken

As part of their overall security package, many double-glazed windows come with a multipoint lock. This is a great choice for those worried about potential thieves who may try for ways to gain access to your home. It's also worth asking your installer about anti-lift locks, these can be fitted with the locks that are already in place to ensure that your window is locked in the closed position.

It's not uncommon for the handle locks to become damaged or fail. double glazing near me are the first part of your window to be forced open by criminals intent on breaking in. The good news is that this is among the easiest parts to fix.


Modern handles made of aluminium and uPVC feature a multi-point locking system known as Espagnolette that is designed to withstand forced entry. This security upgrade is offered as an option for new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot and again as an additional feature on all new double-glazed windows.

If a handle is defective, it's crucial to get it repaired as quickly as possible. The damaged handles could stop the window from closing properly and permit drafts to get in. It could also be a vulnerability that thieves who are opportunistic could exploit and put your family's possessions and your personal belongings at risk.

The process of repairing the damaged mechanism begins with getting access to the frame of the window and then removing the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be sourced which matches the profile of the internal window frame mechanism.

After the mechanism has been replaced the handle can be re-affixed using the original screws however, we usually recommend replacing them with larger ones since this will provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further corrosion. After you've completed this step, your window should be functional again, and at a fraction of the cost of replacing it.

Hinges that are Broken or Faulty

If your windows aren't shut properly, draughts can enter your home, the security barriers will become weaker, and there is an increased risk of damp or water damage. Windows hinges that break or fail to function properly are a common issue and can be easily repaired.

If your uPVC windows don't open or shut and close, it's likely the hinges need to be replaced or repaired. A lot of window manufacturers will require that you purchase a new window unit to fix this simple problem, but we can replace the hinges to save you money.

Window hinges are usually damaged through repeated use, or they are weakened over time by corrosion. If you've got a broken window hinge, it's essential to take steps to avoid further damage. This means not causing the window to close or open.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all manufacturers of window hinges. Get advice from a professional before purchasing parts that will not work with your existing hardware. This can cause further damage.

Faulty hinges can be a major issue for your uPVC windows and doors. They can be a major source of noise and also allow water to infiltrate that can cause damage to your windows.

To fix this issue, first make sure that the pin barrel on both sides of the hinge is aligned. If it's not then tap the headpin using the hammer to make a slight bend in hinge barrel. This will help to keep the pin in the right position. A friend can help you hold the doors while you remove hinge screws and hinges. Replace the hinges with those that are the same size and attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue sets.

After you have repaired the hinges, you can reinstall the door. You could also reattach the handle. It is recommended to replace the screws with the same length of dowels as the original screw, so that they align with each other.

Broken or Faulty Glass

uPVC Windows can become damaged over time, despite the fact that they are excellent at keeping out the cold and retaining heat. This can be the case with broken or damaged glass and faulty locks. If not taken care of, it can turn into a major expense. This can also detract from the appearance of your home and can lead to a loss in insulation. It is essential to repair any damage immediately.

If your glass has cracked, but not broken it is possible to fix it yourself using the right tools and techniques. First, ensure that the surrounding area around the glass is free of debris so that any shards won't injure anyone and aren't a trip hazard. Then, take any broken pieces and dispose of them appropriately. Then, place masking tape over the entire area to stop pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane glass it's a good idea to pre-fit the pane of glass before glueing it back in place to ensure that you'll have enough space to finish the project.

Before applying the glue clean the surface of the damaged frame and the glass with a an unclean, dry cloth. Follow the instructions for application and curing which may differ from product to. You may have to clamp the glass that has cracked with clamps made of lightweight materials designed to hold delicate materials, based on the angle.

Once the adhesive has fully set, carefully place the glass into the window frame. Make sure it is aligned with the frame's edge and that there aren't gaps between the glass sash and the frame. Be careful not to bend the glass when you reinstall it because this could weaken the seal. This could result in condensation or water infiltration.

If you have a glass window that's broken completely or has bigger cracks, contact a professional glazier such as O'Brien(r) to arrange the replacement. If you leave broken glass unattended, it could pose a safety risk for pet and children It's therefore essential to act swiftly.

My Website: https://ctxt.io/2/AADQBgjSFA