Notes

12 Companies Are Leading The Way In Double Glazing Lock Repairs
Double Glazing Lock Repairs

The best locks for your doors and windows can stop burglars from gaining entry into your home. Generally, they don't like breaking glass or slipping through windows that are not closed.

However, some double-glazing owners have experienced issues with their door lock or window lock after it's been installed. These issues can usually be fixed without the need for new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window or door lock if it's damaged or broken. They can repair hinges, striker plate and locks for your double glazing. They will also be able to move the cylinder around to fix any misalignment problems which could cause the handle to not function correctly.

If the key fits inside the lock but doesn't turn or is difficult to insert, then the mechanism may be stuck. The dirt or grease could be trapped in the mechanism. If this is the case, then it might be possible to clean the lock and lubricate it. Use a dry lubricant such as graphite or teflon but not oil as oil attracts dirt and cause it to stick to the mechanism's inside. After lubricating the lock, you need to insert the key and then try to turn it. The lubricant needs to work its way into the mechanism, and the lock should turn smoothly.

The loose screws inside the lock mechanism can be another cause of a faulty lock. They can become loose and fall out or even break off completely, preventing the lock from being able to work properly. A screwdriver is a tool to tighten these screws however, care must be taken not to tighten them too much, because this could cause damage to internal components.

A faulty lock can be dangerous for both you and your family members, especially if you have young children. They can open the door without your knowledge and gain access to your house. If you're concerned about this happening, a licensed locksmith can offer rapid and effective service to re-secure your double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on uPVC doors and windows. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.

Handles that are broken or damaged

As part of their overall security package, most double-glazed windows feature a multipoint lock. This is an excellent option for those worried about opportunistic thieves looking to gain entry to your home. Ask your locksmith for antilift locks. They can be put in in addition to existing locks and will help keep your windows firmly shut.

Handle locks can be damaged or fail. They are the first part that a criminal will employ to open your window. The good news is that this is among the easiest parts to repair.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette which is designed to ward off forced entry. This security upgrade is offered as an option with new uPVC windows. As an optional upgrade, older style uPVC or aluminium handles that are no longer in use can be upgraded to the shoot bolt locking system.

It is essential to fix handles as quickly as you can if it's damaged. Handles that are damaged can prevent the window from closing correctly and also allowing drafts to enter. It can also be a flaw that thieves who are opportunistic could exploit, putting your family's belongings and you at risk.

The process of fixing the damaged mechanism begins with getting access to the window frame and then removing the damaged handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This allows an alternative that is compatible with the profile and the internal window frame mechanisms.

After the mechanism has been replaced, the handle may be reattached using the original screws. However, we suggest replacing them with larger screws since they provide the most secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further corrosion. After that, your window will be operational again and at a fraction of the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows don't close properly, you could be experiencing draughts, an affliction of your home's security barrier and an increased chance of damp or water damage. Broken or defective window hinges are a common issue that can be fixed easily.

If your uPVC windows don't open or close, it is likely that hinges need to be repaired or replaced. While a lot of window companies require you to purchase a whole new window unit to solve this issue, we're able to replace the damaged hinges and save you money.

Window hinges are usually damaged through repeated use, or weakened over time by corrosion. In the event of a broken hinge, it is important to take steps to prevent further damage by being careful not to make the window swing open or closed.

Identifying your hinge type will help you identify the correct parts to fix it. The most common types of window hinges include Maco, Mila, Roto and other brands. It's best to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that are not compatible with your current hardware and could cause further damage.


Faulty hinges are a major issue for uPVC windows and doors. They can be a major source of noise, and they can also permit water to get into your windows.

Check that the pin barrels on both sides of the hinge are aligned. If it isn't then tap the head pin with an hammer to create a shallow bend in the hinge barrel. This will help to keep the pin in the right position. Have a person hold the doors as you take out hinge screws and hinges. Replace the hinges with ones that are the same size and attach the screws using glue. After the glue is drying, put a secure hold on the hinges by using weights or clamps.

After double glazing near me have fixed the hinges, you can install the door again. You can also reattach the handle. Replace site with wood dowels that are the same length as the original screw to ensure that they are compatible.

Broken or faulty glass

uPVC Windows can become damaged over time, even though they are great at keeping cold out and conserving the heat. This can include broken or damaged glass and faulty locks. If neglected, this could be a costly problem. It can also affect the appearance of your home and could lead to a loss of insulation, so it is essential to fix any damage as soon as you can.

You can repair your cracked glass by yourself if you have the proper tools and techniques. First, ensure that the area surrounding the glass is clean so that any shards won't harm anyone and aren't an accident hazard. Then, you must remove any pieces of broken glass and dispose of them appropriately. Apply masking tape across the entire area. This will stop glass fragments from sticking to your skin and splintering when you move them. Making sure the glass pane is fitted prior to applying glue is an ideal option if you are dealing with windows that have two panes. This will ensure you have enough room to finish your project.

Before applying the glue, clean the surface of the broken frame and glass with a a dry, clean cloth. Follow the directions for application and curing, which can vary from one product to the next. Depending on the angle of the crack, you may want to hold the glass while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.

After the adhesive has completely cure, carefully insert the glass inside the window frame. Make sure that it is flush with the frame edge and that there aren't gaps between the glass sash and frame. Avoid bending the glass as you install it again because this could weaken the seal. This could result in water infiltration or condensation.

If you have a glass window that's completely broken or has larger cracks, call a professional glazier like O'Brien(r) to arrange an exchange. If you leave broken glass unattended, it could pose a safety risk for pets and children, so it's essential to act fast.

Read More: http://genomicdata.hacettepe.edu.tr:3000/flydetail94