Notes

If You've Just Purchased Double Glazing Door Lock Repairs ... Now What?
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You'll lose energy in the event that your double-glazed doors fail to function properly. This increases the chance of burglary. Owen the Locksmith can repair your door lock for a reasonable price.

Snapped Key

When a key snaps off within the lock, it can be incredibly difficult. Suggested Browsing poses a security risk since the door may not lock and make you vulnerable to burglars. There are a couple of quick fixes you can make to repair the issue and make your door functional again.

First, remember to stay calm. If you panic and begin doing a lot of fumbling around, you might just end up pushing the broken piece of the key deeper into the lock, thereby making the situation much worse.

Spray WD-40, or any other penetrating oil, into the lock. This will assist the broken piece to be removed more easily. You can also use the screwdriver to break off any pieces that are stuck. If you have a piece of the key stuck, grab it with a paperclip or other thin metal object and pull it. Both methods work, but you must be careful not to push the broken key piece further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you do not have any of these available, you can use needle-nose pliers that bend to create a hook. Additionally, you can use a pair tweezers to grab and remove the remaining pieces of broken keys.


If you are unable to remove the broken key piece then you can use a lock deicer. It's available in many hardware stores and works by freezing any moisture present within the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. You can book a double-glazing repair online or call us to discuss your needs.

Broken Cylinder

A broken cylinder can pose a major security risk. A professional locksmith is able to fix the cylinder. Locksmiths will need to tap the cylinder in order to fix it. They can do this with the hammer or any other tools, but the most effective method is to make use of an extended match or piece of wire. Then, place the match's end or wire near the keyway. The locksmith can strike the lock to crack it open. This is better than using the hammer, which could harm the lock.

Overheating is the most common reason behind cylinder heads cracking. This can occur when the cylinder block and cylinder head are made of different metals, like cast iron and aluminium. Different metals will heat up and cool down at different rates. This could cause localized hotspots to expand faster than the rest of the cylinder.

Another possible cause for cracks in cylinders is corrosion. When the cylinder head and the block of the cylinder are not maintained properly, this could lead to rusting or corrosion and cause them to expand at more than they should. This can cause cracks as time passes.

If your uPVC window lock or door is brittle or requires lots of pressure to turn, it could be due to several things. A defective locking mechanism, misalignment, or the wear of the handle are typical reasons for this issue.

Fortunately it's a simple and affordable fix for the majority of homeowners of double glazing . A professional locksmith will usually be able to solve this problem within an hour of arriving at your home. They can replace the locking mechanisms, or replace the window handles, and also change the gearboxes, depending on your specific needs. A skilled locksmith will always be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to 3 Star security TS007 euro cylinders that will provide an extra layer of security against burglars. This is a small price to pay for the security that comes with knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks could break. They have intricate mechanisms that become less effective over time. If yours fails it's difficult to identify the cause of the issue and make sure you fix it correctly.

If the issue is related to the locking mechanism inside or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you to stop the draughts. It could be costly to repair or replace the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

Screwdriver When the window is open, loosen the screw holding the handle. The screw should be on the inside of the backplate. It is typically hidden by an eye-catching cap to conceal it for aesthetic reasons. Be sure not to lose any of the internal components inside the handle, for example the plates or levers that are on either side of the spindle. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, using another screwdriver, loosen the screw that holds the handle to the spindle in the back. Once the screw is loose, remove the handle and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or at hardware stores). Screw it into place. Be careful not to tighten too much as this could damage the handle or the window frame.

Make sure the new handle is fitted after which you can close and test the handle. It is likely that it will operate smoothly and you'll be able to unlock your window.

Be sure to double-check that your uPVC window is shut properly while you're working with the handle. If they aren't closing properly, you may experience damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on the window frames to ensure they close correctly.

Broken Spindle

It is often the case that the spindle inside a handle breaks rather than the handle itself. This is most typical in uPVC tilt and turn windows. These types of windows require a handle which operates a locking mechanism in the frame of the window. The handle is attached to a rod in the centre that is then activated by a series of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned, it is likely the spindle is broken. This can be a frustrating issue.

Luckily, there are options to fix this problem. A reputable locksmith can swiftly and effectively fix the issue. A reputable locksmith will be able to disassemble the handle of the window by using a tool to remove the wheel part where the spindle is located. This is done without damaging the handle or causing any other damage to the window frame.

After removing the wheel, the technician can inspect the spindle to determine the cause of the break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. The process is done in a clean, well-lit room by highly skilled technicians.

The next step is to clean the damaged spindle, this assists in removing any dirt or debris that could be hindering its normal operation. The spindle may be replaced or repaired. If the technician is replacing the spindle, the dowel can be used that is the same size to the original. The technician will then make holes in the same way into both pieces. This ensures that the new spindle has a precise fit with the handle.

If the damaged spindle is beyond repair, it could be required to replace it completely. Home centers offer generic replacements. However, if the style of your window is unique then it is necessary to find a woodworker or cabinet maker who can replicate the exact component for you. Once the spindle has been installed, it is attached to the handle. Place the screw holes on the handle with the existing screws in the frame. Once the handle is securely seated, you can operate your uPVC windows.

My Website: https://www.pdc.edu/?URL=https://www.repairmywindowsanddoors.co.uk/wickford-windowrepair/