Notes

3 Reasons You're Not Getting Double Glazing Lock Repairs Isn't Working (And Solutions To Resolve It)
Double Glazing Lock Repairs

A good quality lock on your doors and windows helps to prevent burglars from accessing your home. They usually don't want to break glass or attempt to squeeze through open windows.

However, some double-glazing owners have experienced issues with their door or window lock after it's been installed. These issues can be resolved without the need for a new double glazing.

Broken or damaged locks

If your uPVC window or door lock is damaged or defective and requires a locksmith, they can fix it for you. They will be able to repair the striker plates, hinges and locks on your double glazing. They can also adjust the cylinder in order to fix any misalignment which could cause your handle to work properly.

If the key fits inside the lock but doesn't turn or is difficult to insert, then the mechanism may be locked up. The dirt or grease could get stuck in the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. It is essential to make use of a dry lubricant such as teflon or graphite, rather than oil, which can attract dirt and adhere to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should work through the mechanism and the lock should be able to rotate easily.

Screws that are loose within the lock mechanism are another reason for a malfunctioning lock. They may loosen and fall out, or even break off completely preventing the lock to work properly. These screws can be tightened with a screwdriver, but be careful not to over tighten them. This could damage the internal components.

A faulty lock can be dangerous for both you and your family, especially if you have small children. They can easily unlock the door without knowing which gives them access to your house. If you are worried about this happening, then a licensed locksmith can offer a quick and efficient service to re-secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair all types of faulty and damaged mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always required.

Handles that are broken or faulty

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great option for those worried about potential thieves who may try for ways to gain access to your home. Ask your locksmith about antilift blocks. These can be installed in addition to existing locks and will aid in keeping your windows shut.


Handle locks can be damaged or fail. They are the first part that criminals use to force open your window. Luckily, just click for source is that this is among the most simple parts to fix.

Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette that is designed to prevent forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. As an optional upgrade, older style aluminium or uPVC handles that are no longer in use can be upgraded to a shoot bolt locking system.

When a handle is faulty it's important to get this repaired as soon as is possible. A damaged handle could prevent the window from closing properly and allow drafts to get in. It could also be a vulnerability that thieves who are opportunistic could exploit, putting your family's belongings and your personal belongings at risk.

To fix the malfunctioning mechanism, first gain access to the window frame and remove the damaged handle. The gearbox is then accessed to determine the kind of gearbox used to open the handle. This will permit an alternative that is compatible with the profile and the internal window frame mechanisms.

After the mechanism has been replaced, the handle can be re-attached using the original screws however, we generally recommend replacing them with longer ones because this will ensure a more secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further deterioration. After you've completed this step the window should be functioning again at a fraction of the cost of replacing it.

Hinges that are broken or Faulty

If your windows don't close properly, you may suffer from draughts or the weakening of your home's security barrier and a higher risk of water or damp damage. Window hinges that break or become faulty are a common occurrence and are easily fixed.

If you have a uPVC windows that isn't able to open or close and close, it's likely that your hinges are damaged or broken and require replacement. Most window companies will require you to purchase a new window unit to fix this simple problem, but we can replace the hinges in order to save you money.

Window hinges are usually damaged by repeated use or weakening over time due to corrosion. If you have a broken window hinge, it's important to take precautions to prevent further damage. This means not causing the window to close or open.

Knowing the type of hinge you have will help you locate the right parts to repair it. Maco, Mila and Roto are all window hinges. Get advice from a professional before purchasing parts that will not fit into your existing hardware. This can cause more damage.

A faulty hinge is a major issue for uPVC windows and doors. They can be a major source of noise, and they can also allow water to infiltrate which could damage your windows.

To fix this issue, first check whether the pin barrel on both sides of the hinge is aligned. If not then tap the head pin using a hammer to make an arc in the hinge barrel. This will help to keep the pin in place. Have a person hold the doors while you remove hinge screws and hinges. Replace the hinges and then install screws with glue. Finally fix the hinges using clamps or weights while the glue dries.

After your hinges have been repaired after which you will be able to install the door and then reattach the handle. It is recommended to replace the screws using the same length of dowels as the original screw so that they align with each other.

Broken or Faulty Glass

uPVC Windows can become damaged in time, despite the fact they are great at keeping cold out and conserving the heat. This could include broken or damaged glass, as well as faulty locks. This is a problem that can be very expensive when left unattended. This can also detract from the aesthetics of your home and result in a decrease in insulation. It is essential to repair any damage promptly.

If your glass is cracked, but not broken, you can usually fix it yourself using the right tools and methods. Make sure the area around the broken glass is clear of debris so that any fragments don't cause injury or trip hazards. Then, you must remove any pieces of broken glass and dispose of them in a safe manner. Apply masking tape across the entire area. This will prevent glass shards from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to applying glue is an ideal option if you are dealing with a window that has two panes. This will ensure you have enough space to complete your project.

Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the curing and application instructions that differ from product-to-product. You may have to clamp the cracked glass with lightweight clamps designed to support fragile materials, depending on the angle.

When the adhesive has completely cured, carefully reinstall the glass in the window frame, making sure that it is flush with the edge of the frame and that there aren't any gaps between the glass and the window sash. Be careful not to bend the glass when you install it again, as this could weaken the seal. This could result in water infiltration or condensation.

Contact a professional glazier such as O'Brien(r), to arrange an appointment to replace your glass if the window is completely broken. It's crucial to act fast if you have broken glass.

Here's my website: http://mpages.co.nz/home.php?mod=space&uid=224370