Notes

How The 10 Worst Double Glazing Lock Repairs Fails Of All Time Could Have Been Prevented
Double Glazing Lock Repairs

Good locks on your doors and windows will help prevent burglars from entering your home. They aren't likely to break glass or try to squeeze through open windows.

However, some double glazing owners have experienced issues with their door lock or window lock after it was installed. Fortunately, these issues are usually fixable and don't require to pay for new double glazing.

Broken or Faulty Locks

A locksmith can fix your uPVC window lock or door lock if it's broken or faulty. They can repair the striker plates, hinges and locks on your double-glazed. They can also move the cylinder around to fix any misalignment issues that may be causing your handle to not operate properly.

The mechanism could be seized if the key fits in the lock, but it will not turn or become difficult for you to insert. This can be caused by dirt or grime getting stuck in the mechanism. If this is the case, it might be possible to clean the lock and then lubricate it. Make use of a dry lubricant, like graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the mechanism's inside. After lubricating the lock you need to insert the key and attempt to turn it. The lubricant should work its way through the mechanism, and the lock should be able to turn without difficulty.

Loose screws within the lock mechanism are a different reason for a broken lock. They may loosen and fall out or even break off completely preventing the lock to function properly. The screws can be tightened with a screwdriver, but be cautious not to tighten them too much. This can damage the internal components.

A faulty lock is dangerous for you and your family. This is especially the case if you have children. It can be easy for them to open the door without your knowledge, and this can give them access to your home. If you are worried about this happening, a vetted locksmith can provide fast and efficient assistance to secure your double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing and can repair all kinds of damaged and damaged mechanisms handles, handles, cylinders, and lock systems for both uPVC windows and doors. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.

Handles that are damaged or faulty

Many double-glazed windows have the multi-point lock as part of the overall security package. This is a great option for those who are concerned about potential burglars trying to gain access to their home. Ask your locksmith about antilift blocks. They can be put in in addition to existing locks and aid in keeping your windows shut.

Handle locks are usually damaged or fail. They are the first component that a criminal will employ to open your window. The good news is, this is one of easiest parts to repair.

Modern uPVC handles as well as aluminium handles come with the multi-point locking mechanism referred to as Espagnolette, which is designed to resist forced entry. This security upgrade is available as an option with new uPVC windows. As an alternative upgrade older style aluminium or uPVC handles that are no longer used can be upgraded to the shoot bolt locking system.

It is important to repair the handle as soon as you can if it's damaged. A damaged handle can stop the window from closing properly and letting in a draft. It could also be a weak point that burglars with a plethora of opportunities could exploit, placing your home and belongings at risk of theft.

To fix the malfunctioning mechanism, you first need to access the window frame, then take off the broken handle. The gearbox is then accessed to identify the type of gearbox used to open the handle. This allows a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can be returned to the original screws. However, double glazing repairs near me suggest replacing them with larger screws to ensure the most secure fit. The final stage is to apply a coat of clear sealant in order to protect the handle from further corrosion. After that your window will be operational again and at only a fraction of the cost of replacing the entire window.

Hinges that are Broken or damaged

If your windows do not close properly, draughts can enter your home, the security barriers will weaken, and there is an increased chance of water damage or damp. Broken or faulty window hinges are a common problem that can be fixed easily.

If your uPVC windows don't open or shut, it is likely that the hinges need to be replaced or repaired. While most window manufacturers require you to purchase a new window to solve this issue, we're able to replace the faulty hinges and save you money.


Window hinges may break due to repeated use or could be weakened due to corrosion over time. If you have a broken window hinge, it is important to take precautions to avoid further damage. This means not causing the window to close or open.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Common kinds of window hinges include Maco, Mila, Roto and other brands. It is recommended to speak with an expert in this regard so that you don't make the mistake of buying parts that are not compatible with your current hardware and could cause further damage.

A faulty hinge is a major issue for uPVC windows and doors. They can be a significant source of noise and also allow water to infiltrate which can damage your windows.

To resolve this issue, first verify whether the pin barrel on both sides of the hinge is aligned. If not then tap the headpin using the hammer to create a slight bend in hinge barrel. This will help to keep the pin in the right position. Have a person hold the doors while you take out hinge screws and hinges. Replace the hinges with ones of a matching size and then attach the screws using glue. Finally, secure the hinges with weights or clamps while the glue sets.

After your hinges have been repaired, you should be able to put back the door and re-attach the handle. It is a good idea to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each other.

Broken or damaged glass

uPVC Windows can be damaged in time, despite the fact they are excellent at keeping cold out and retaining warmth. This can be the case with broken or damaged glass and faulty locks. If left unattended, this can turn into a major expense. It can also detract from the aesthetics of your home and may lead to a loss of insulation, which is why it's crucial to repair any damage as soon as you can.

You can repair your cracked glass by yourself if your have the appropriate tools and techniques. First, make sure the area surrounding the glass is clean so that any shards won't injure anyone and aren't an accident-prone area. Remove any broken glass pieces and dispose of them in the proper manner. Apply masking tape over the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. Pre-fitting the glass pane prior to adhering it to the wall is an ideal option in the case of windows that have two panes. This will ensure that you have enough space to finish your project.

Before applying the glue, clean the surface of the damaged frame and the glass with a dry, clean cloth. Follow the directions for application and curing, which can vary from product to. Based on the angle of the crack, you may want to secure the glass in place during the curing process with lightweight clamps that are designed to hold fragile materials.

After the adhesive has fully cure, carefully install the glass into the window frame, making sure it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful to avoid flexing the window as it's being put back in place, as this can weaken the seal and cause water infiltration and condensation.

Contact a professional glazier such as O'Brien(r) for an appointment to replace your glass if the window is completely broken. It's important to act quickly if you have broken glass.

Here's my website: https://glover-hvidberg-3.federatedjournals.com/double-glazing-repair-kit-10-things-id-like-to-have-learned-in-the-past-1703449790