Notes

24 Hours For Improving Double Glazing Lock Repairs
Double Glazing Lock Repairs

Having quality locks on your windows and doors helps to prevent burglars from gaining access to your home. They usually don't want breaking glass or trying to squeeze through open windows.

Some owners of double glazing, however, have encountered issues with their door or window lock after the installation. These issues can be fixed without the need for new double glazing.

Broken or Faulty Locks

If your uPVC door or window lock is damaged or broken, then a locksmith can fix it. They can repair the striker plates, hinges, and locks on your double-glazed. They can also move the cylinder around to fix any misalignment problems that may be causing your handle to not operate correctly.

The mechanism may be locked when the key fits into the lock, but it will not turn or be difficult for you to insert. Grease or dirt can get stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon but not oil as oil can attract dirt and cause it to stick to the inside mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant will work through the mechanism and the lock should be able to rotate with ease.

A damaged lock can be caused by loose screws in the mechanism of the lock. They can become loose and fall out or even break completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten these screws however, caution must be taken not to over-tighten them since this could damage the internal components.

A faulty lock can be dangerous for both you and your family, especially if you have young children. It can be easy for them to unlock the door without you knowing and thus give them access to your home. If you're concerned that this could happen, a vetted professional locksmith can assist you re-secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and damaged mechanisms on uPVC windows and doors. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.

Handles that are broken or damaged

As part of their overall security plan, many double-glazed windows have a multipoint lock. This is a great choice for those who are worried about potential burglars trying to gain entry into their home. Ask your locksmith for antilift locks. They can be installed as an addition to the existing locks and will ensure that your windows are securely shut.

Handle locks are usually damaged or fail. They are the first part that criminals utilize to force open your window. The good news is, this is one of easiest parts to fix.

Modern handles made of aluminium and uPVC feature a multi-point locking system known as Espagnolette that is designed to withstand forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. As an upgrade option, older aluminium or uPVC handles that are no longer in use can be upgraded to the shoot bolt locking system.

If a handle is defective, it's crucial to get it repaired as quickly as you can. Faulty handles may prevent the window from closing properly and permit drafts to get in. It could also be a vulnerability that thieves can take advantage of, putting your family's belongings and your personal belongings at risk.

To repair the damaged mechanism, first gain access to the window frame and remove the damaged handle. The gearbox that opens the handle is accessed and the type identified, so that a replacement may be sourced which is in line with the profile of the internal window frame mechanisms.

Once the mechanism has been replaced the handle can then be fixed using the original screws - however, we generally recommend replacing them with longer ones since this will provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further corrosion. After that, your window will be functional again and at a fraction of the cost of replacing the entire window.

Hinges that are broken or damaged

If your windows don't close properly, you may suffer from draughts or an affliction of your home's security and an increased risk of damp or water damage. Window hinges that fail or fail are a common problem and can be fixed easily.

If your uPVC windows don't open or shut, it is likely that the hinges require to be repaired or replaced. While a lot of window companies require you to purchase a whole new window unit to resolve this simple issue, we're able to replace the damaged hinges and save you money.

Window hinges can be damaged by repeated use, or weakening over time due to corrosion. If you find a broken hinge, it's crucial to take precautions to avoid further damage by being careful not to push the window open or closed.

The type of hinge you are looking for will help you find the correct parts to fix it. double glazing repairs near me , Mila and Roto are all window hinges. It is recommended to speak with a professional in this case so that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.

A faulty hinge is a major issue for uPVC doors and windows. They can be an important source of noise, and they could also allow water to get into your windows.

Verify whether the pin barrels on both hinge halves are aligned. If it's not, tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will help to keep the pin in place. Then, ask a helper to hold the door as you take the hinges and hinges from both the doorjamb and the door. Replace the hinges and attach screws using glue. Finally fix the hinges using clamps or weights while the glue is drying.

Once your hinges are repaired after which you will be able to install the door and re-attach the handle. Replace the screws with wooden dowels of the same length as the screw that was used to ensure that they match.

Glass that is broken or damaged

uPVC Windows can become damaged in time, despite the fact they are great at keeping cold out and conserving heat. This can be the case with broken or damaged glass, as well as faulty locks. If not taken care of, it can become a very costly issue. This can also detract from your home's aesthetics and cause a loss of insulation. It is essential to repair any damage promptly.

You can repair the crack in your glass by yourself if you have the right tools and techniques. Make sure the area around the broken glass is clear of debris to ensure that fragments don't cause injury or trip hazards. Next, remove any pieces of broken glass and dispose of them properly. Then, put masking tape to the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane window, it's a good idea fit the glass pane before gluing it back in place so that you know you'll have enough room to complete the project.


Before applying the glue clean the entire surface of the broken frame and the glass with a an unclean, dry cloth. Follow the directions for application and curing times, which can vary from product to product. You may need to clamp the broken glass with lightweight clamps designed to hold fragile materials, based on the angle.

When the adhesive has completely cured, carefully reinstall the glass inside the window frame, ensuring it's flush with the edges of the frame, and there aren't any gaps between the glass and the window sash. Be cautious not to flex the window while it's put back in place, as this can weaken the seal and lead to condensation and water infiltration.

If you have a glass window that is completely shattered or has larger cracks, contact an experienced professional glazier such as O'Brien(r) to organise an exchange. Leaving broken glass unattended can cause danger to children and pets and is why it's important to act fast.

Here's my website: https://cutt.ly/2wFegI7Y