Notes

11 Ways To Completely Revamp Your Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism become faulty? Maybe the handles on your uPVC windows and doors aren't aligned properly or are difficult to operate.

You'll be wasting energy in the event that your double-glazed doors fail to perform as they should. This increases the likelihood of burglaries. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

It can be a hassle when a key gets stuck inside the lock. It could also be a security problem in that it can expose you to an intruder if the door does not lock. There are a few easy solutions you can use to resolve the issue and make your door functional again.

Be calm. If you panic, you could end up pushing the broken key piece further into the lock.

Then, spray WD-40 or another penetrating oil into the lock to help the broken piece slide out more easily. You can also use a screwdriver to break any pieces that are stuck. If you happen to have a little bit of the key sticking out and you want to remove it, make use of a paperclip, or any other metal object that is thin to grab it and remove it. Both methods are effective, but you need to be careful not to push the damaged key piece further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you do not have any of these handy, you can make use of needle-nose pliers to bend them and create a hook. Also, a pair tweezers is a good way to grip and pull out the last bit of the broken key.


If you're unable to pull the broken piece of key out, try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture present in the lock.

If none of these tricks seem to be helping you, it's time to call in locksmith. The experts at Fitlocks can quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also modify your double glazing door mechanisms to allow them to operate more easily. Request a repair for your double glazing through us online, or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder could pose an extremely risky security issue. Luckily, it's an easy repair for an expert locksmith to complete. A locksmith will have to tap the cylinder to fix it. They can do this with the hammer or any other tool, but the most efficient way is to use a long match or a piece of wire. Place the match or wire end near the keyway. After that, the locksmith will strike the lock and break it open. This is much better than using a hammer that could damage the lock.

The most common cause of cracks in the cylinder head is overheating. This can occur when the block and cylinder head are made of different metals like cast-iron and aluminium. When various metals are heated and cool at different rates, it can cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion can be a reason for fractures in cylinders. If the cylinder block and head are not maintained in a timely manner, they can rust or corrode, which can cause them to expand more than expected. This can cause cracks as time passes.

If your uPVC window lock or door is brittle or requires lots of pressure to turn, it can be caused by many things. This problem can result from a defective locking mechanism, or misalignment as well as a worn-out handle.

This is a simple and inexpensive fix that most double glazing owners can accomplish. A professional locksmith should be able to solve the issue within an hour after arriving at your residence. Depending on your needs, they can replace the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to advise you of the most cost-effective option for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which give you an extra security layer from burglars. It's a small amount to enjoy the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks can break. They have complex mechanisms that wear out over time. If yours breaks, it can be difficult to determine the source of the problem and make sure that you repair it correctly.

Repairing your damaged handle, whether it's an internal locking mechanism or latch can increase the security of your uPVC door and reduce the risk of draughts. Incorrectly repairing or replacing your handle can be costly and may damage the door's frame and lock It is therefore worth taking some time to make sure you do it correctly.

Screwdriver When the window is open remove the screw that holds the handle. It should be located on the inside of the back plate, which is usually concealed by an aesthetically pleasing cover for the screw reasons. Be sure to not lose any of the internal components within the handle, for example the levers or plates on the opposite side of the spindle. Keep them in the same order so that it is simpler to replace them in the event of a need.

Next, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw on the back of the handle which holds it to the internal spindle with another screwdriver. Once the screw is free, you can remove the handle and take the broken spindle out. Replace it with a new spindle, ensuring that it's the same length (you can find them online or in hardware stores). Securely screw double glazing repairs into the frame. Be careful not to tighten too much because this could cause damage to the handle or the window frame.

Close the handle and test it. It should work smoothly, and you will be able to open your windows after a few times.

Don't forget to double-check that your uPVC window is closing properly when you're working with the handle. If they aren't closing properly, you may experience damp or draughts inside your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on your window frames to ensure they close properly.

Broken Spindle

It is more common for the spindle to break rather than the handle. This is particularly common in uPVC tilt and turn windows. These windows require a handle that acts as a locking mechanism within the window frame. The handle is attached a central rod that activates a series of cams with a mushroom shape that secure into the frame of the window keep. If the dead latch mechanism is not able to open when the handle is turned, it's likely the spindle is damaged. This can be a frustrating issue.

There are solutions to this problem. A skilled locksmith can quickly and efficiently solve the issue. They will be able to remove the window handle using a tool to remove the wheel component of the mechanism, where the spindle goes. This can be done without damaging the handle or causing any other damage to the frame of the window.

After removing the wheel the technician will inspect the spindle to determine the cause of the break. This involves breaking down the spindle into its component parts and meticulously noting their general condition as well as any particular areas of damage or excessive wear. The process is performed in a clean room by highly skilled technicians.

Then, clean the damaged spindle. This will remove any debris or dirt that could be hindering it from operating normally. Following this, the spindle could be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is similar in size to the original. He will then drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the spindle that is damaged is beyond repair, it could be necessary to replace it completely. Home centers sell generic replacements, but if the style of your window is unique then it is necessary to contact a wood worker or cabinet maker who can duplicate the exact part for you. After the spindle is installed, it can be fixed to the handle. Line up the screw holes on the handle with the existing screws in the frame. Once the new handle is seated you will be ready to operate your uPVC window.

Homepage: http://ezproxy.cityu.edu.hk/login?url=https://www.repairmywindowsanddoors.co.uk/goldersgreen-windowrepair/