Notes

14 Questions You Shouldn't Be Uneasy To Ask Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism deteriorated? Perhaps the window or door handles aren't aligned properly or are difficult to use.

It is essential that your double-glazed doors work smoothly, otherwise you will lose energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

It can be frustrating when a key is snapped inside a lock. It's also potentially a security risk since the door may not be locked and could leave you open to intrusion. Fortunately, there are some quick fixes you can use to solve the issue and get your door functioning properly again.

Be calm. If you panic and start playing around with your keys you may end up pushing the damaged piece of the key further into the lock, thereby making the situation even more difficult.

Next, spray WD-40 or another penetrating oil into the lock to make the broken piece slide out more easily. You can also use a screwdriver to break up any pieces that are stuck. If you happen to have a little bit of the key that is sticking out and you want to remove it, use a paperclip or some other metal object that is thin to grab it and pull it out. Both of these methods work, but be careful not to push the broken piece of the key deeper into the keyway.

Some paperclips have grooved edges that could serve as hook extractors and some Jigsaw blades can also be used for this purpose. If you don't have any of these available, you can use needle-nose pliers to bend them and create a hook. Additionally, you can use a pair tweezers to grab and remove the last bit of the broken keys.

If you are unable to remove the broken key piece Use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present inside the lock.

If none of these tricks are working you, it's time to call locksmith. Fitlocks experts can quickly fix issues such as broken handles and broken keys with uPVC locks and door mechanisms. They can also alter your double glazing door mechanisms to make them easier to operate. You can request an appointment online for a double-glazing repair or contact us to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an extremely risky security issue. It's a good thing that it's a simple repair for professional locksmiths to complete. To repair the cylinder, a locksmith will need to tap it. They can do this using an hammer or another tools, but the most effective method is to use an extended match or piece of wire. The match or wire's end in the keyway. The locksmith can strike the lock to crack it open. This is superior to using a hammer that could cause damage to the lock.

The most frequent cause for cylinder head cracks is overheating. This can happen when the cylinder block and head are made from different metals, like cast iron and aluminium. Different metals can heat up and cool off at different rates. This could cause localized hotspots to expand faster than the rest of the cylinder.

Another possible cause for cracks in the cylinder is corrosion. If the head and block of the cylinder are not maintained properly they could be corroded or rust, which can cause them to expand faster than anticipated. As time passes, this may cause cracks.

If your uPVC window or door lock is stiff or requires an enormous amount of pressure to turn, it could be due to many things. A malfunctioning locking mechanism, misalignment or the wear of the handle are typical causes of this problem.

This is a simple and cost-effective fix that a majority of double glazing owners can do. A professional locksmith is able to solve this issue within an hour of arriving at your home. Based on your requirements, they can replace the locking mechanism, replace the window handles, and also change the gearboxes. A professional locksmith will always be able to advise you on the most cost-effective solution for your home. They can even recommend upgrades to high-security 3 Star TS007 euro cylinders that will provide an extra layer of protection against burglars. It's a small price to get the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks can break. They are equipped with complex mechanisms that wear out over time. If yours is damaged, it can be difficult to determine the source of the issue. Make sure that you repair it correctly.

Fixing your broken handle, whether it's the internal locking mechanism or latch, will improve the security of your uPVC door and prevent draughts. Incorrectly repairing or replacing your handle can be very expensive and can damage the door's frame and lock, so it's worth taking some time to make sure you do it correctly.

With the window in the open position and the window open, loosen the screw that secures the handle using a screwdriver. The screw should be on the inside of the backplate, which is usually concealed by the cap of the screw for aesthetic reasons. You should not be able to replace any internal parts of the handle, such as the plates and levers on either side. Keep them in the same order to make it easier to replace if necessary.

Next, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle by using another screwdriver. Once the screw is loose, you should be in a position to pull the handle away and pull off the damaged spindle. Replace it with a brand new spindle, ensuring it's the same length (you can buy them on the internet or at hardware stores). Securely screw it in place. Do not tighten the screw too much as this can damage the handle and the window frame.

Close the handle and try it. It should operate smoothly, and you will be able open your window after a few times.


Make sure to check that your uPVC window is shut properly when you're using the handle. If they aren't closing properly, you could experience damp or draughts inside your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be capable of adjusting the hinges on your window frames so they can shut properly.

Click Webpage is more common for the spindle to break than the handle. This is especially frequent in uPVC tilt and turn windows. These windows require a handle to operate a locking device in the window frame. The handle is attached to a rod in the centre that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned, it is likely the spindle is damaged. This can be a frustrating problem.

Luckily there are ways to remedy this situation. A reputable locksmith can quickly and effectively address this problem. They will be able to disassemble the window handle by using a tool that can remove the wheel component of the mechanism where the spindle goes. This is done without damage to the handle or the window frame.

After the wheel has been removed, the technician will examine the spindle to determine what caused it to break. This involves disassembling the spindle and examining every component, observing any damage or excessive wear. This process is typically performed in a clean environment by highly skilled technicians.

Next, clean the damaged spindle. This will help remove any dirt or debris which may be obstructing it from functioning normally. After that the spindle could be repaired or replaced. If it's being replaced, the technician could use the dowel that is similar in size to the original and drill mating holes into both parts of the spindle. This ensures that the new spindle is precisely matched to the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centres sell generic replacements but if the style of your window is unique then you will need to speak with a woodworker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle with the frames existing screws. Once the new handle is firmly seated you will be ready to operate your uPVC window.

My Website: https://my.desktopnexus.com/heronclerk1